ISTA-D and E-sys confirmed! Both can be used for FSC codes import.
It is possible to import fsc codes with Ista-d. After a message from “online activation” you can choose the usb storage and problem solved!
Also, you can import Repair fsc codes with E-sys
Step 1 … Remember to Change your FA (Vehicle Order / VO) … FIRST … then proceed with the
instructions below to import your code. (PAGE 16 of Beginner’s Guide)
REMOVE CODE: 693
ADD CODE: 655
Write changes to the FA back to the car
Then VO_Code the HU_ENTRY, HU_ENTRYNAV, HU_CIC or HU_NBT
Once completed, then proceed below:
When you got your SAT Radio FSC Code, you should have received 3 files:
e.g. xxxxxxx_006F0001.der (FSC Code Certificate)
e.g. xxxxxxx_006F0001.fsc (FSC Code)
E-Sys => Options => Settings => FSC Tab => Certificate Field:
Load FSC Code Certificate (e.g. xxxxxxx_006F0001.der)
E-Sys => Comfort Mode => FSC => FSC Field:
Load FSC Code (e.g. xxxxxxx_006F0001.fsc. The FSC Code file must first be Base 64 Decoded or else ESys can not read it. (Use B64Dec for Decoding – http://4mhz.de/b64dec.html ).
Base decoded file must be named the same exact file name as the un-decoded file name, however save to a different folder, so you do not get confused as to which is decoded and which is not!!
FA Field: Select “Read FA” to use cars current VO.
Parameter Fields: (Example for Sat Radio FSC Code and CIC):
Diagnostic Address (hex) = 0x63 (99 in Decimal for HU_CIC; I think the same for HU_NBT)
Application Number (dec) = 111 (6F in Hexidecimal – In FSC File Name, e.g xxxxxxx_006F0001.fsc)
Base Variant = HU_NBT (CIC module name, e.g. HU_CIC, HU_NBT, HU_ENTRY, etc.)
Upgrade Index = 0x01 (In FSC File Name, e.g xxxxxxx_006F0001.fsc))
Select “Upgrade FSC” to Import and Activate FSC Code.
Select “Check FSC Status”, and you should see the following in the list that appears:
SWTType SWTclassic full
FSCStatus accepted ! MUST SHOW ACCEPTED
FSCCertStatus accepted ! MUST SHOW ACCEPTED