GODIAG GT100 is a powerful testing platform which is compatible with lots of devices to do OBDII protocol communication detection and ECU maintenance/ diagnosis/ programming/coding. Here will share three test reports of what GT100 can do.
Test 1: Read fault codes by GODIAG GT100 + Vident iEasy200
Test 2: Read Flash by GODIAG GT100 + MPPS V18
Test 3: Test voltage waveform by GODIAG GT100 + MPPS V18
Test 4: Read CAS4 ECU by GODIAG GT100+ Autel MaxiDiag MD808 Pro
In details…
Test 1: Read fault codes by GODIAG GT100 + Vident iEasy200
Step 1: Connect ECU and GT100 with the colored jumper cable by the corresponding wiring diagram
Step 2: Connect GT100 with Vident iEasy200 code reader via the OBD 2-in-1 extension cable
Step 3: Use the banana plug as the extend cable to connect the resistance 120 0hm
Step 4: Supply power to GODIAG GT100 OBD2 Break Out Box by an AC power adapter
Step 5: Turn on GT100 power switch
The CAN protocol light flashes to indicate that the code reader is communicating with the ECU.
Step 6: iEasy200 code reader works normally
-Read ECU system status
-Read vehicle ID number
-Read fault code
Video demo:
Test 2: Read Flash by GODIAG GT100 + MPPS V18
ECU module: AUDI ME7.1
Connect GT100 with MPPS V 18 and ECU module
Read flash data quickly
Test3: Test voltage waveform by GODIAG GT100 + MPPS V18
ECU module: ME7.5 AUDI A6
Connect GT100 with MPPS V18 ECU programmer and ECU module
Open MPPS software to read data
The waveform shape shows on Oscilloscope is fluctuating when reading data.
After finish reading data, the waveform is flat.
Test 4: Read CAS4 ECU by GODIAG GT100+ Autel MaxiDiag MD808 Pro
Connect Godiag GT100 with Autel MD808 Pro by OBD 2-in-1 extension cable
Connect GT100 to CAS4 module via the professional adapter
Turn on GT100 power switch
MaxiDiag MD808 Pro starts to work
Select European-> BMW
It will prompt “turn off ignition and wait about 10 seconds, then switch on ignition again”
Just go ahead
Select the car model- 4 series-> F32/F33-> Control unit-> Drive-> CAS car access system-> ECU information
Turn on the ignition switch
Read out ECU info
Read out fault codes
Read out live data
In the operating process, you need to turn on the ignition switch when doing any function, after that, you need to turn off the ignition switch.
Please watch the video to understand clearly.
Result: GODIAG GT100 OBD2 ECU connector read fault code, read flash, test voltage waveform, read ECU info and live data successfully!
Read more:
GODIAG GT100 AUTO TOOLS OBDII BREAK OUT BOX ECU CONNECTOR USING TIPS
http://blog.cardiagtool.co.uk/godiag-gt100-auto-tools-obdii-break-out-box-ecu-connector-using-tips/