SEC-E9 CNC Automatic Key Machine can cut various key including automobile keys, motorcycle keys, dimple keys etc. It’s easy to work out and has a light weight, small size. This process will show you how to cut a dimple key with Sec-E9.
Connect the power adaptor at first and turn the switch to clockwise to power on
Fix the automobile key clamp
Fix the decoder and cutter.
Put the calibration block on the clamp and tighten it
Click the ‘setup’ button and then press ’First Next’ button to enter the Calibration menu
Press ‘star’ button to calibrate the distance between decoder and cutter. The decoder origin is automatically done.
Click the image of ‘Change tool to decoder, ready?’ to continue the calibration
Disassemble the car key clamp, then fix dimple key clamp.
Fix calibration block on it and click the icon on the screen
Press the ‘close’ button to go back to home page, and then press ‘setup’ button to the ‘device setup’ interface.
Press ’decoder’ button and choose ‘dimple key clamp’ to calibrate the decoder length
Remove two standard decoders. Install dimple cutter and dimple decoder.
Press ‘decoder’ button and choose ‘dimple key clamp’ to calibrate the decoder length
And then press ‘cutter’ button and choose ‘dimple key clamp’ to calibrate the cutter length
After that, select key brand and model to enter the key page
Press ‘decode’ button on enter decoding page
Check if the original key can work well and then fix the original key on key clamp, please use stopper to guide the position
Press ‘decode’ button to start decoding
The biting number is displayed on the screen
Take away the original key can fix A side of new blank. Then take away the stopper which to guide the position
Press ’Cut’ button. Choose cutting speed and position according to key type. Click ‘Cut’ to start cutting, please remember to close the safe gate!
Cutting…
Cutting is done. Open the safe gate. Clean the clamp and new key. Take out the new key.
Fix the B side. Please use a stopper to guide the position.
Press ‘Cut’ button to start cutting the second side please remember to close the safe gate.
You can have a try if the new key works after the last cutting.
More Key Cutting Machine Tech Support:
http://www.cardiagtool.co.uk/wholesale/locksmith-amp-key-cut-tool/