Xhorse KEY TOOL PLUS Tablet integrates the main functions of remote control and chip, anti-theft matching, programming, accessory replacement, maintenance reset, etc., it is, for sure, a professional locksmith tool in the current market that reserves future expansion capabilities that can solve all the needs of daily work.
The core of this article is to tell the customers how to add new key for specific car model, it will take Ford Freestyle ID49 as an example to explain this procedure in detail.
But before that, some necessary knowledge about Key Tool Plus diagnostic tablet is also important.
Check its Basic Functions:
Generate Remotes and Smart keys
Renew (unlock) remotes
Remotes clone
Program and Immo Transponder
IC/ID Clone
Frequency Detection
Transponder detection, clone, and generating
Support for Jaguar, Land Rover, Porsche, Volvo, Mitsubishi, and others
Service light reset
Key cutting machine control
Common vehicle IMMO programming
Check its Other Features:
√ Support DOIP
√ Support CAN-FD
√ Support CAN and K protocol switch pin
√ Support Chip pin detection
√ Support Toyota smart key programming without simulator
√ Support Long-distance IMMO collection
Check its Built-In Components:
▪OBD matrix switch
▪Radiofrequency simulator
▪Smart key simulator
▪integrated key identification coil
▪BENZ infrared reading head
Core part of this article==> Step-by-step operation guide:
Come to VVDI Key Tool Plus diagnostic tablet’s main screen and tap “Immo programming” to get this process started.
Here, the unit would lead you to choose your vehicle model and year, under the option menu of “All brands”, scroll down the screen and tap “Ford”>> “China market”>> “Select by model”>>”Eco sport”.
Next, it will give you two options, “Immo system” and “Smart key system”, there is no doubt that “Immo system” is our choice, because that’s what we are gonna do in this test.
Click on it and “2018-”, you have to choose depending on the actual production year of your car.
Tap the “Start programming” button at the bottom of the unit’s screen, at this moment, it will give a pop-up instruction, just do it as required and then tap “OK” to continue.
Tap “Add key” and after reading the “Note” message carefully, tap “Yes” to move on.
Under the “Internal storage” option, there are “bin” file data that is already stored for you to use in key programming. Choose your intended “DFLASH” file to open.
Choose system successfully, reading VIN code data, please wait…
Processing data, please wait…
This will take you like 30 seconds to 1 minute.
Trying secure login, please wait…
Calculating data online, keep the network open during calculation, please wait…
When this message appears, you have to strictly follow what it said, that take out the original key from the ignition and put the new key on the induction coil area. Click on “OK” and it will ask you to confirm the current number of keys, if no problem with that, click on “OK” again.
Program keys successfully. If no other keys to be programmed, click on “No” to make it stop and complete this process.
Use the new programmed key to start the ignition switch, it’s time to test if it works well.
Tap the corresponding key buttons, it works fine as expected. Congratulations!
That’s all. Thank you for sharing your time with us!
Don’t forget to contact us at:
Email: sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698
Or leave a message at https://www.cardiagtool.co.uk/
to tell us what suggestions or questions you have about our products.