Renolink V1.87 Renault OBD2 ECU Programmer Installation Guide

Renolink V1.87 for Renault ECU programmer comes with Renolink OBD2 interface and software CD. It supports ECU, Airbag and key programming. What’s new in V1.87? How to install the software?

V1.87 Renolink for Renault Overview:

Software language: French, English

Operation system: Win7, Win10

Don’t require activation. But need to install driver.


-EEPROM read / write
– ECU Resetting
– Clear Crash Airbag
– Airbag reset
– Airbag Virginize
– KEY Programming
– TDB (cluster)
– Indicator Programming
– ECM Programming
– UCH Programming
– EPS Virginizer
– EPS Resetting

V1.87 Renolink red USB interface with good quality red board:

What’s new in V1.87 Renolink:

This update is for well known problem with ECM V42 

– Read/write eeprom and read/write flash for dashboard Dacia Logan2 / Dacia Sandero2 / Dacia Lodgy / Dacia Docker / Dacia Duster ph2 from years 2013-2014 and 2014-2017
-Read/write flash, eeprom and km were added for dashboard (VDO) Mégane 3 and

Fluence 2015+
– Was added into program – read and write flash, eeprom and km for the Laguna 3 dashboard.
– Read/write km,- read/write eeprom, – read/write flash for dasboard Renault Fluence.
– Also was added key programming UCH BMT Sagem for Dacia Solenza, Dacia Supernova, Renault Twingo, Renault Kangoo, Renault Master (years 1998-2003)
– Read/write km for dashboard Renault Modus
– Read/write km, read/write eeprom for dashboard Koleos

In this version was implemented:
-reading of PIN code for HFM Renault Clio 4 and Renault Captur 2016+, a valid Card is required to teach HFM, because the procedure virginses it.
Also a new database from December 2019 was added.

-This version we added cards programming for Clio4 (2012-2015), also a new database from July 2019

Was added into this update:

Deletion IMMO code from the power steering (DAE) in Dacia Duster ph3. The encoding is automatic – at the first ignition.

Was added:
– learn ECU from DACIA Logan 2 / DACIA Sandero / DACIA Lodgy / DACIA Docker / DACIA Duster ph2

Was added into program : KEY PROG

key programming for Dacia Logan 2
key programming for Dacia Sandero 2
key programming for Dacia Duster ph 2
key programming for Dacia Lodgy
key programming for Dacia Dokker
key programming for Renault Clio Symbol 3

How to install Renolink V1.87 software:

Renolink V1.87 software tested link:

Renolink V1.87 free download link:

Password: xxv3xl

Size: 217.5 MB

Renolink V1.87 Renault software installation video: 

1.Copy Renolink 1.87 software to desktop


2.Unzip “renolink_setup87”


3.Install CDM21218_SETUP_720




4.Install renolink_setup87




5.Right click “RenOLink v1_87”-> Select “Properties”-> “Open file location”

6.Copy “RenOLink” and “renolink.dat” to C disk RenOLink file



7.Send “RenOLink” application from C disk to desktop


8.Delete RenOLink v1_87 shortcut on the desktop

9.Open computer management to set COM&LPT ports


10.Select Bts per second: 115200, and Latency Timer (msec):1

renolink-v1.87-renault-install-guide-16 renolink-v1.87-renault-install-guide-17

11.Then can run Renolink v1.87 software

Select “Scan” option-> “ECM” to scan


When finish scanning, a list of ECM function will appear


Here select some services for examples

Read Memory By Address:


Validation Routines Tests:


Trame 03 Papillon