ACDP has released its BMW G-series All Key Lost Solution.
ACDP tools with new BDC2 Test Platform will allow AKL programming.
Here we will show you how.
Tools:
ACDP / ACDP II
ACDP BMW BDC2 Bench Test Platform
Path:
BMW>>FEM/BDC>>IMMO/Mileage>>BDC2 ICP+ OBD (F/G Chassis)>>Add Key (All key lost)
Steps:
Step 1: Backup coding data
Use Yanhua ACDP Module 3 and B48 Interface Board to backup EEPROM data
Step 2: Backup FAFP data
Step 3: Write IMMO data
Step 4: Write coding data
Step 5: Made dealer key
After making the dealer key, turn on the ignition to do key match
Step 6: Write DME ISN
Verify the key can start the car normally, then go to next step
Step 7: Reset EGS EWS(turn on ignition, but not start the car)
After finishing these steps, start the engine – both the key and vehicle should now function properly.
*Step1 requires module 3 + B48 interface board to back up the original BMW engine EEPROM data. If you have another tool to backup engine eeprom data, just buy ACDP Module 38 + BDC2 Test Platform.
Done! That’s BMW G-Series BDC2 AKL solution from ACDP.
Skype: cardiag.co.uk
WhatsApp: https://wa.me/8615002705698