• Autel Update Service

Auto ECU Programmer

Alientech KESS3 V2.04 Add Bosch ZF AL551/ 8HP55/ ES10-1002

Alitentech KESS3 V2.04 upgrade is now available! Bosch ZF AL551/ 8HP55/ ES10-1002 is added. Stay one step ahead of the competition and keep your KESS3 [...]

OBDSTAR X300 Classic G3 vs. Autel IM608

In this article, we will compare the new OBDSTAR X300 Classic G3 to the Autel IM608. See what we have got in G3 and where it works better or inferior than [...]

GM 6L80 TCM Possible PINOUTs

Question: Why is the OBDSTAR DC706 6l80 pinout different than the diagram on websites including Alldata? Is this a misprint?   There are new [...]

Alientech KESS3 V2.03 Add Keihin A6244103100 RH850

Alitentech KESS3 V2.03 upgrade is now available! Keihin A6244103100 RH850 on KTM Super Duke R 1390 via OBD are added. Make sure your KESS3 is in an [...]

Alientech KESS3 Read ISUZU Transtron on Boot Mode Tips

Quick Question: Alientech KESS3, has anyone got any tips on soldering to these Transtron chips for boot mode, I see some people use clips but they aren't [...]

How OBDSTAR DC706 Clone Chrysler Continental GPEC2A?

In this article, we will show you how to clone JEEP Continental GPEC2 using OBDSTAR DC706 with MP001 Adapter. Step-by-step Instructions: Turn on [...]

OBDSTAR DC706 May Update Add DQ500 AQ250 Odometer Correction

OBDSTAR DC706 ECU Tool May 2024 Update is available! New version adds Odometer Correction for VW Continental DQ500(0BH) TC1766 and VW AISIN AQ250(09G) [...]

Alientech KESS3 V2.02 Add SIM2K-140 SIMK42 ME7.9.41

Alitentech KESS3 V2.02 upgrade is now available! Five new BOOT protocols -- SIMK42 5WY1xxxx, AN470, SIM2K-140, ME7.9.41, and M79 -- are added. Make sure [...]

How OBDSTAR DC706 Clone JEEP Continental GPEC2?

In this article, we will show you how to clone JEEP Continental GPEC2 using OBDSTAR DC706 with MP001 Adapter. Step-by-step Instructions: Turn on [...]

Alientech KESS3 V2.00 Add DCU17PC43 from Ford via OBD

Alitentech KESS3 V2.00 upgrade is now available! BOSCH DCU17PC43 from Ford via OBD are added. Make sure your KESS3 is in an active subscription and enjoy [...]

Must GM E39 with Different Service Numbers Match before Clone?

Purpose: Have some GM ECM to clone using OBDSTAR DC706. Do the Part number and Service Number need to match exactly? My 2 E39 have different service [...]

Alientech KESS3 Read Mercedes BOSCH ME2.1 Tips

One customer asked how to read Mercedes BOSCH ME2.1 using Alientech KESS3. Here are three ways to read this ECU: 1) By linking together Pin 1 and Pin [...]

Alientech KESS3 V1.99 Add Mitsubishi ECU

Alitentech KESS3 V1.99 upgrade is now available! Mitsubishi ECUs in Kawasaki, Suzuki, and Yamaha on Bench Mode are added. Check out update info, KESS3 [...]

GODIAG GPT Boot Adapter Better than OBDSTAR P004?

GODIAG GPT Boot Adapter with resistors built in is designed for Read/ Write ECU. Confirmed: To connect wires to OBDSTAR G3/ DC706, GODIAG GPT Boot [...]

Alientech KESS3 V1.98 Add Siemens SIM4LKE Siemens EMS2214

Alitentech KESS3 V1.98 upgrade is now available! Siemens SIM4LKE Siemens EMS2214 on BOOT Mode are added. Check out update info, KESS3 with an active [...]

OBDSTAR DC706 Read GPEC2A PCM on Bench/ Boot Tips

One customer gave feedback about OBDSTAR DC706 working on GPEC2A: Having some issues reading flash on GPEC2A PCM... I have made all connections as [...]

Alientech KESS3 V1.97 Add Isuzu N-Series Truck Denso 276700-2051

Alitentech KESS3 V1.97 upgrade is now available! Isuzu N-Series Truck Denso 276700-2051 on Bench Mode are added. Check out update info, KESS3 with an [...]

OBDSTAR DC706 April 2024 Update Add MEG17.9.8 MEDG17.9.8

OBDSTAR DC706 ECU Tool April 2024 Update is available! New version adds Hyundai/ KIA KEFICO MEG17.9.8 TCM(R5F72549R), Hyundai/ KIA KEFICO MEDG17.9.8 [...]

How to Solve Alientech KESS3 Error 007C-0005-8000?

Quick Question: When I connect Alientech Kess3 and it is sychronizing, it always gives error 007C-0005-8000 and cannot launch software [...]

Alientech Kess3 V1.96 Add JCB Delphi DCM7.24 BOOT Mode

Alitentech KESS3 V1.96 upgrade is now available! Tuning and Cloning Delphi DCM7.24 for JCB on BOOT Mode are added. Check out update info, all KESS3 with [...]
error: Content is protected !!