Comments Off on Dimsport New Genuis vs. Dimsport New Trasdata
Dimsport is a prominent name in ECU tuning. It has various protocol bundles like NEW GENUIS and NEW TRASDATA.
In this article, we are going to show you the [...]
Comments Off on Possible Solution to VW Cluster Off after Pogo Pin Reading
Tried to read the tacho with GODIAG GT110 via VVDI Key Tool Plus, during the process, the part completely went off, now it doesn't work anymore, also not on [...]
Comments Off on How to Open and Solder Key for VVDI MLB Tool Add Key?
Before adding VW MLB keys, Xhorse VVDI MLB Tool requires users to dismantle and solder key for original data calculation.
One customer asked how to [...]
Comments Off on Alientech KESS3 V2.12 Update Add Continental Vitesco SID321
Alientech KESS3 V2.12 is released!
This latest KESS3 development enables you to read and write Continental Vitesco SID321 ECUs, either via OBD or directly [...]
Comments Off on LAUNCH X431 SmartLink J2534 Passthru with ODIS Review
LAUNCH X431 SmartLink can works as a J2534 Passthru device with ODIS, Xentry...
Here is a review:
Disappointed because Smartlink read only 2 modules via [...]
Comments Off on How to Program All Key Lost on VW MLB System?
VVDI MLB Tool or KYDZ is designed for adding new keys for VW MLB systems, so one customer asked if there is anything that will do an AKL on these MLB [...]
Comments Off on Alientech KESS3 V2.11 Add Denso GEN IV R7F702002 V35A-FTS
Alientech KESS3 V2.11 now is released!
Remap Toyota and Lexus in “BENCH” mode
Remap the Denso GEN IV R7F702002 V35A-FTS control units that manage the [...]
Comments Off on LAUNCH X431 Smartlink J2534 Passthru Work with XENTRY OK
LAUNCH X431 SmartLink can work as a J2534 passthru device.
It is compatible with various OEM software like ODIS, XETNRY...
Here we show you how to use it [...]
Comments Off on Solved! New Registered Autel IM508S No Internal Memory
One customer gave feedback that he just registered his new Autel IM508S Programming Tablet but it shown no internal memory for updates. He did factory reset [...]
Comments Off on Fixed! Key Tool Plus Load VW Crafter AKL File “Unknown Version”
Question:
AKL VW Crafter,
Blade done open ok, remove EIS. Bench it and read data, but when l put data to "IMMO DATA TOOL" Xhorse Key Tool Plus Tablet [...]
Comments Off on Top 2 Test Platforms with Pogo Pin for VAG CAN-BUS UDS Dashboard
Test platforms with pogo pin are very useful when we need to read eeprom from VAG CAN-BUS UDS dashboard.
So, here we have picked top 2 test platforms for [...]