Look here: How to use Yanhua 35160/35080 programming tool
What is Yanhua 35160/35080:
It’s designed for 35160WT chips that can not be cleared (also for M35080/M35080-3/M35080-6/M35080V6/M35080VP/D80DOWQ/160DOWQ/35160WT*/35128W). you can use the simulator to make odometer adjustment to the dashboard.
Source: http://www.cardiagtool.co.uk/yanhua-35160-35080-programming-emulator.html
Can be used as a programmer
No issues of compatibility with a programmer
How to use Yanhua 35160/35080 programming tool for KM change:
Step 1: solder the chip
Solder the 35XX chip on the meter to the specified location of the simulator
Do check the chip direction.
Step 2: establish a new folder
Establish a new folder on your desktop, for example, named “mileage modification”
Step 3: connect to the simulator
Connect the emulator to the mini usb cable, and then plug into the computer via a usb port
The computer displays the U disk named “35xxx memory” and pops up “find out a removable storage device”
Step 4: decompress the modification tool
Open the U disk “35xxx memory”, copy the compressed file of 35xx mileage modification tool .rar to the desktop “mileage modification” folder, and then decompress it to the current folder to get the file of 35xx mileage modification tool .exe .
Step 5: copy the original data to “mileage modification” folder on the desktop
Based on the original car chip, select the corresponding original data and copy them to the “mileage modification” folder on the desktop
For example,
If the original chip is 35080, choose 35080 raw data.bin;
if the original chip is 35160, then choose 35160 raw data. Bin
Step 6: open the mileage modification tool
Open the “mileage modification” folder, drag the original data to the modification tool
Step 7: correct odometer
Enter the mileage data you want to modify as prompted (note the mileage you want to put with a unit ,like XXXkm or XXXmi), then confirm, and the new file 35xxx raw data _yyyy.bin will be generated automatically
Step 8: copy the modified data to the U disk “35XX memory”
Open the U disk “35XX Memory” , delete the 35xxx simulated data.bin file to the corresponding chip (note it’s the “simulated” data file), and then copy the 35xxx original data _yyyy.bin file generated in the “mileage modification” folder to the U disk.
Step 9: compare the data
Unplug and plug the 35160/35080 programming tool, open the U disk “35XX memory”, compare the newly generated simulated data and the modified data in the “mileage modification” folder. If the data is the same, the operation is successful. Solder the simulator to the instrument chip location.
Tip: The copied raw data.bin file is recommended to be saved to the computer, so that the data can be recovered when the operation is wrong. If the operation is abnormal, don’t be nervous. Unplug the usb and plug it back to restore normal.
Video: steps in detail to change km
Tech support: http://www.cardiagtool.co.uk/