How Autel MaxiSys MS908S Pro II Identified an Immobilizer Communication Fault on a Porsche 911
The technician investigated an intermittent no-start issue on a 2001 Porsche 911 Carrera 2 using Autel MaxiSys MS908S Pro II diagnostic scanner. The owner reported that turning the ignition only produced a click, and the engine would crank only after repeated attempts.
A weak battery was suspected, so the battery was charged and live data was [...]
How to Buy ID48 96bit Chip Cloning Token on Launch Tablet?
ID48 chip cloning function on Launch Tablets will cost 1 token each time.
ID48 token will work on Launch X431 PRO Series and Launch X431 PAD Series.
So, how to purchase [...]
2020 Ford Fusion All Smart Key Lost Programming Tips
How to program Ford Fusion 2020 all key lost?
Alarm is active or not? At least program two keys?
Here are some tips for programming Ford 2020 smart [...]
AutoTuner New Bench Protocol for Continental Simos8.3
New AutoTuner Protocol!
We are thrilled to announce that the Continental Simos8.3 ECU is now supported in BENCH mode. Commonly found in Audi and Volkswagen vehicles [...]
How to Learn and Test New BMW BDC2 Key using ACDP Tool?
After adding new keys using ACDP BMW G-series BDC2 Test Platform, we need to learn new keys in cars or we can do it using ACDP platform.
1.How to Learn key in [...]
Alientech KESS3 V2.31 Update Denso TFW6A-E and Mitsubishi HF01
Alientech KESS3 V2.31 is available! New version adds Denso TFW6A-E TCUs and Mitsubishi HF01 ECUs.
Exclusively with KESS3, you can operate in BENCH mode – including [...]
AutoTuner Update OBD Read Write EMS2510/ 11/ 12/ 13
New AutoTuner Protocol Update!
We are updating our OBD protocol for Continental EMS2510, EMS2511, EMS2512 and EMS2513 ECUs installed in Ford vehicles.
Until now, [...]
How to Activate VAG SFD Unlocking on LAUNCH X431 Tool?
Dear Launch User:
VAG SFD 1-year License is available on Mall on all Launch PAD Series Tablet and Launch PRO Series Tablet (CRP919 BT is included, DIY tablet is not [...]
Mercedes Benz ML320CDI 224HK Lost EIS Solution
Mercedes Benz ML320CDI 224HK Problem:
Ignition lock with key was lost as well as the fact that there was something unsafe about the engine control that was mounted and an [...]
Alientech KESS3 V2.30 Update Marelli GF10 Bench Mode
Alientech KESS3 V2.30 is available!
You can now operate in BENCH mode on Marelli GF10 ECUs, expanding your intervention options on numerous FCA group models produced [...]
Yanhua ACDP BMW G-Series BDC2 All Key Lost Guide
ACDP has released its all key lost solution for BMW G-Series BDC2 -- ACDP BMW BDC2 Bench Test Platform.
Here we will show you how to use it.
Note:
1)ACDP won't [...]
AutoTuner New Bench Protocol for Bosch MED17.8.33
New AutoTuner Protocol!
The Bosch MED17.8.33 ECU, installed on the McLaren Artura, is now supported in BENCH mode. An exclusive support, for your AT Tool.
With its sharp [...]
VVDI Key Tool Plus vs. VVDI Key Tool MIDI
Xhorse new VVDI Key Tool MIDI Tablet is coming soon.
Apart from its three versions -- Basic, Advanced, and Enhanced version, users also wonder about the differences between [...]
Xhorse Multi Prog Won’t Read SIMOS11.1 on Boot Solution
One customer gave feedback that Xhorse Multi Prog won't Simos11.1. He tried to read it on boot and Multi Prog seemed to have option but it won't work.
When hit connect [...]
How to Clone Mitsubishi ID46 Key using Autel AT100 Chip?
In this article, we will show you how is new Autel AT100 Chip.
We will test if it will clone Mitsubishi ID46 key.
Tools:
Autel KM100 Key [...]
AutoTuner New OBD VR Protocol for Bosch MDG1 ECU
New AutoTuner Protocol Release!
Bosch ECUs MD1CP002, MD1CS001, MG1CS003, MG1CS024 and MG1CS201 are now supported for Alpina, BMW, Land-Rover, Mini, Morgan and Toyota [...]
Alientech KESS3 V2.29 Update Bosch EDC17CV41 Bench Mode
Alientech KESS3 V2.29 is available!
New Version expands its support for the Isuzu L35 3.0TD (from 2020 onwards) with a new specialized protocol for Bosch [...]
ACDP BMW BDC2 Bench Test Platform AKL Programming Guide
ACDP has released its BMW G-series All Key Lost Solution.
ACDP tools with new BDC2 Test Platform will allow AKL programming.
Here we will show you [...]
OBDSTAR DC706 Won’t Identify Hyundai SIM2K-240 Solution
One customer gave feedback that his OBDSTAR DC706 ECU Tool won't read SIM2K-240 and made errors. Connected gnd can H can L .. and 14.5 volts. ECU is from 2013 Hyundai [...]
How to Fix BMW BDC2 Add Key Lost Coding using ACDP?
When we try to add key for BMW BDC2, it may lose coding.
In this case, we can fix this using ACDP Module 38.
Here we will show you how.
Connect ACDP to BDC2 [...]
AutoTuner Update OBD Protocol for Siemens MSS70 MSV70
New AutoTuner Protocol!
New release for Siemens MSS70 and MSV70 ECUs, now supported in OBD mode for BMW vehicles!
This protocol introduces automatic detection [...]