• Autel APB300 SMART KEY PROGRAMMER

Author: sales

How to Renew TOPDON TopScan Subscription?

This article is the guidance on how to Renew TOPDON TopScan Subscription. 1.Where to Renew Subscription? Option 1: Click on the software [...]

Toyota Tundra 2019 Odometer Repair using CG100X

CGDI CG100X is an affordable programmer covering airbag reset, odometer, Chip, ECU... Here comes a review: TOYOTA TUNDRA 2019 | CG100X TO REPAIR [...]

2014 Mercedes E350 Used EIS Programming by Autel IM508

In this article, we are going to show you how to program a used EIS and virginize ISM from 2014 Mercedes Benz E350.   Tools: Autel [...]

Mercedes GLC 300 VIN/ KM Check in Autel MaxiSys Tablet

New VIN/ Odometer Check function was added into Services in Autel MaxiSys Tablet. This function allows us to check out VIN and KM info in various modules [...]

OBDSTAR G3 Clone Ford Transit Custom 2018 BCM

Here comes a review of OBDSTAR G3 cloing BCM: Users could buy ECU Cloning License to Activate function in G3, making it own the same ECU function as [...]

Best Tools to Unlock Toyota Smart Remote

One customer asked how to unlock his Toyota remotes. He needed to unlock to use for other car, tried many times using Xhorse Key Tool Max but [...]

Read EDC17CP11 with GODIAG GPT on DC706 and Multi Prog

Here comes a review of GODIAG GPT Boot Adapter: Reading Bosch ECU with Godiag GTP on OBDSTAR DC706 and Xhorse Multi-Prog.   ECU Land Rover [...]

Autel Ultra vs Topdon Phoenix

Question: Currently using an Autel MS908 without the pass through box. It hasn’t been updated for the last 2 years so I’m now looking at buying a new [...]

Alientech KESS3 V2.06 Add BMW Motorbike Yamaha Bike&Marine

Alientech KESS3 V2.06 update is available now! Motorcycles. Bench - Bosch ME17.2.42 BMS-ME and Mitsubishi 1TD/18P/2LS-8581A-XX ECUs from BMW Motorrad and [...]

Can Autel IM608 II Program Locked Radio from GM Vehicle?

Quick Question: I have Autel IM608 Pro 2. Has anyone encountered a locked radio on 2013 Buick or any other GM vehicle? Just says lock with no [...]

Mercedes W222 A/C Control Unit Programming using CG100X

Here we got a Mercedes W222 2018 and we need to remove the old A/C control unit and install a new one. First, we need to read the Renesas [...]

How to Know if A Mercedes is FBS3/ FBS4 before Key Programming?

One customer asked if VVDI Key Tool Plus will program smart or semi-smart function. Here comes info about his car: VIN: #4JGDF7CE0DA21---- 2013 Mercedes [...]

Autel Ultra Lite Knock off Sprinter W907 Seat Belt Warning Light

Here we are going to knock off Sprinter W907 2018+ seat belt warning light using Autel Ultra Lite. Simply turn it off in Retrofit [...]

Best ECU Tools to Read PSA DCM6.2C

Here comes a review of Xhorse Multi Prog working on PSA DCM6.2C: Read and write a PSA DCM6.2C in boot successfully with online CKS calculation... But it [...]

How to Put 2020 Wrangler Ignition in Lock State?

One customer asked how to put 2020 Wrangler's ignition in lock state.. The ignition is off and hazards on, but just get the ignition lock message on Autel [...]

OBDSTAR X300 Classic G3 vs. DC706 vs. P50

Here is a comparison among three OBDSTAR Tablets: OBDSTAR X300 Classic G3, OBDSTAR DC706, OBDSTAR P50. Intro All three units come with P004 adapter, [...]

CG100X Hyundai SANTA FE 2020 Odometer Correction Review

Here comes a review of CGDI CG100X on odometer correction: Used CG100X to do mileage reduction or repair, doesn’t corrupt the data or the MCU! Connect [...]

How to Solve Autel Honda Odyssey “Immo system not normal”?

Question: Had a 2012 Honda Odyssey, the car starts but shuts off. And the green light is flashing. Then saw at the top of the aftermarket key there was a [...]

BOSCH M3.8.3 VAG ECU IMMO OFF Manual Solution

Question: Best tool and adapter to read this? Never desolder before, m3.8.3 golf ecu need immo off Here is the manual solution to immo [...]

How to Replace Xhorse VVDI2 Battery?

If your Xhorse VVDI2 shows the notification that requires you to replace battery inside, you could send it back to your seller for replacement or change [...]
error: Content is protected !!