Author: sales
Free Download GM GDS2 2023.10.19 Software
Here we are going to share with you the latest GM GDS2 and GM DPS software. Get free download link from Cardiagtool.
Free Download:
GM GDS2 [...]
Range Rover Sport 2021 Odometer Correction by A 500-EURO Tool OK
How to correct Range Rover Sport 2021 odometer via OBD port using a tool less than 500 Euros? Here we will show you how to finish this job by GODIAG [...]
Launch X431 V10.10 PC Clone Software Add Engine Validation
Engine Data Validation now is added to Launch X431 V10.10 PC clone software.
This function is compatible with X431 ECU&TCU Programmer and X431 PROG3 PC [...]
Clone Bosch Engine MD1CS089: Launch X431 or CG FC200?
One customer gave feedback that his only thing missing is to read and write md1cs089. When will md1cs089 be able to read is it urgently needed?
Here we have [...]
How to Activate and Unlock Launch X431 SGW Function?
In this article, we will show you how to activate and unlock SGW function on Launch X431 Diagnostic Tablet.
Compatible Device:
CRP909E, [...]
Read BMW MSD85.1 DME ISN: Autel, FC200, Autohex, or FoxFlash?
Question:
Trying to read ISN for this MSD85.1 DME however the only option Autel IM608 with GBOX has is the MSD85 that shares the same connection [...]
How to Quickly Identify ECU Type on FoxFlash Manager?
Question:
2010 Ford Ranger could read obd but straight forward bench using Original FoxFlash.
Is there a page or list to help users identify [...]
How to Update VNCI MDI2 Firmware?
When VNCI MDI2 Scanner shows as below, that means a firmware update is needed.
Free Download VNCI MDI2 Device Manager:
VNCI MDI2 [...]
Autel Ultra EV vs. Autel Ultra vs. Autel Ultra Lite
Autel Ultra EV Tablet is designed for Diagnosis of Electric Vehicles. It is equipped with new EV DIAG BOX and EV DIAG Kit. And we can also update items [...]
Fixed! X431 IMMO PLUS Program Seat MII 2018 Communication Error
Question:
When programming Seat MII 2018 and 2021 using my X431 IMMO PLUS, software failed to communicate cars.
Dealer key generated ok but key learning [...]
Lonsdor K518PRO vs. Lonsdor K518ISE
Lonsdor New Generation -- K518 PRO is coming! Here we are going to show you what's new in Lonsdor K518 PRO compared to old Lonsdor [...]
CG FC200 V1.1.6.0 Software Update Add GPEC Series
V1.1.6.0 CG FC200 Software is relesaed! Get free download link from Cardiagtool.
Fre Download CG FC200 Software:
V1.1.6.0 CG [...]
Free Download V1.3.0.0 CGDI CG100X Software
V1.3.0.0 CGDI CG100X Software is released! Get free download link from Cardiagtool.
Free Download CG100X Software:
V1.3.0.0 CG100X
*After [...]
Autel MK808BT PRO vs. XTOOL D7
Here we are going to compare Autel MK808BT PRO and XTOOL D7. We will cover firmware, diagnosis, and key programming.
1.Firmware
Autel used to and [...]
How is FoxFlash ECU Programmer for Ford 6DTC Powershift?
One customer wondered where to find pinout of 6DCT450 TCU Ford on FoxFlash Software. FoxFlash supports Ford powershift or not?
Here is all 6DCT [...]
FoxFlash V1.3.6 Update Special Customized Version FAQs
Before, we have posted the update notice about V1.3.6 FoxFlash Special Customized Version. Here we have collected FAQs about this update, check them [...]
How to Test Launch X431 PAD VII Elite VCI and OBD Cable?
One customer gave feedback that his X431 PAD VII Elite didn't respond at all after its VCI was connected.
The indicator is off, so
Here is [...]
Autel IM608II Work with SPG149 NEC Dash Cable Review
Question:
Is this adapter compatible with the Autel 608II ?
Check VAG UDS cable, and here is a review:
VAG UDS bench cable make all key lost with [...]
OBDSTAR DC706 Clone Chrysler GPEC3 by Boot Tips
One customer asked how to connect OBDSTAR DC706 to GPEC3 module. The DC706 diagram required three red 12V cables but he only got two in P004 Adapter [...]
How Autel MK808BT PRO Connect with 2018 Jeep Wrangler?
Question:
Autel MaxiCom MK808BT Pro, will it connect with a 2018 Jeep Wrangler JL 2.0l using AutoAuth to read codes and to register/program a new [...]