Program 2004 Ford Escape All Key Lost: Autel IM508 or OBDSTAR X300 DP Plus

Case: Program IMMO on 2004 Ford Escape (ID 4D60 4D70) all keys lost

Device: Autel MaxiIM IM508 or OBDSTAR X300 DP Plus?

Both two auto key programmers support Immobilizer function. Check the operation guide below.

1.Autel IM508 program IMMO key to 2004 Ford Escape:

Connect MaxiIM IM508 with the vehicle

Select “Ford”-> “Manual Selection”-> “Ford”-> “USA”-> “Escape”-> “2001-2004”-> “Blade key”-> “Immobilizer (PWM)”-> “Erase key (All keys lost)”autel-im508-x300-dp-plus-2004-escape-akl-1 autel-im508-x300-dp-plus-2004-escape-akl-2 autel-im508-x300-dp-plus-2004-escape-akl-3 autel-im508-x300-dp-plus-2004-escape-akl-4

Note: All keys will be erased. At least 2 keys are required for key learning to complete.

Turn the ignition on

Security accessing, please wait about 3-10 minutes…

Press “Yes” to continue

Erase all the keys

Erasing successfully


All known key has been erased. You must now program a minimum of two keys

The engine will not start until you complete the following steps:

Perform the steps below to learn the ignition keys:

-Turn the ignition off

-Turn the first key in the ignition to ON for 3 seconds, then remove

-Turn the next key in the ignition to ON for 3 seconds, then remove

-If you want to add more keys, press [YES] and repeat the step above again

-After you finish all necessary functions, confirm that all learned keys can start the engine. Verify that the engine continues to run for at least 5 seconds.


Learning completed.


2.OBDSTAR Key Master DP Plus add new key to 2004 Ford Escape:

Connect X300 DP plus with the vehicle

Select “Diag Program”-> “IMMOBILIZER”-> “FORD/ LINCOLN”-> “FORD/ LINCOLN V32.43”-> “FORD” -> “Immobiliser” -> “PCM SYSTEM (OLD VEHICLE”-> “ALL Keys Lost”

autel-im508-x300-dp-plus-2004-escape-akl-8 autel-im508-x300-dp-plus-2004-escape-akl-9

Min keys required 2, press ENTER to continue

Wait for 10 min…

Insert the first key to the ignition and turn on, then remove

Insert the next key in to the ignition and turn on, then remove

Finish learning, then confirm whether all the learned keys can work or not

autel-im508-x300-dp-plus-2004-escape-akl-10 autel-im508-x300-dp-plus-2004-escape-akl-11

OBDSTAR X300 DP Plus Full Version Supports ECU Programming & Toyota Smart Key Get Free Renault Converto& FCA 12+8 Adapter (UK Ship No Tax):

Autel MaxiIM IM508 IMMO Key Programmer (UK Ship No Tax):