• Autel Update Service

Kess3

Alientech KESS3 V2.03 Add Keihin A6244103100 RH850

Alitentech KESS3 V2.03 upgrade is now available! Keihin A6244103100 RH850 on KTM Super Duke R 1390 via OBD are added. Make sure your KESS3 is in an [...]

Alientech KESS3 Read ISUZU Transtron on Boot Mode Tips

Quick Question: Alientech KESS3, has anyone got any tips on soldering to these Transtron chips for boot mode, I see some people use clips but they aren't [...]

Alientech KESS3 Read Mercedes BOSCH ME2.1 Tips

One customer asked how to read Mercedes BOSCH ME2.1 using Alientech KESS3. Here are three ways to read this ECU: 1) By linking together Pin 1 and Pin [...]

How to Solve Alientech KESS3 Error 007C-0005-8000?

Quick Question: When I connect Alientech Kess3 and it is sychronizing, it always gives error 007C-0005-8000 and cannot launch software [...]

Alientech Kess3 V1.96 Add JCB Delphi DCM7.24 BOOT Mode

Alitentech KESS3 V1.96 upgrade is now available! Tuning and Cloning Delphi DCM7.24 for JCB on BOOT Mode are added. Check out update info, all KESS3 with [...]

Alientech Kess3 V1.95 Add Denso 112731-5040 and 33910-79JX/57KX

Alitentech KESS3 V1.95 upgrade is now available! Remap and clone on bench the ECU Denso 112731-5040 and Denso 33910-79JX/57KX for Subaru and Suzuki are [...]

Alientech KESS3 Slave Read Denso RHF4 4N15 Tips

One customer asked is there a protocol for this Denso 4N15 MA275700-9692 on KESS3. He can't even get an ID reading the file is just mumbojumbo almost [...]

How KESS3 Clone DCM6.2C Engine from Peugeot Boxer 2015?

In this article, we will show you how to clone DCM6.2C using Alientech KESS3. Vehicle: Peugeot Boxer [...]

Alientech Kess3 V1.94 Add Bosch MSE8.0 from Zontes and CF Moto

Alitentech KESS3 V1.94 upgrade is now available! OBD Remap on Bosch MSE8.0 on CF Moto’s CForce range models and Zontes’ small-displacement ZT models are [...]

How to Solve Kess3 Error while checking file compliance (-10)?

Quick Question: Anyone run into this, happened few weeks ago, used transdata that day to get jobs done. Now today same thing, I tried my 2 Kess3 Masters, 2 [...]

Alientech Kess3 V1.92 Add Triumph, KTM and Ducati ECU

Alitentech KESS3 V1.92 upgrade is now available! Bench/ Boot Remap on Triumph, KTM and Ducati ECUs are added. Check out update info, all KESS3 with an [...]

Alientech KESS3 V1.91 Add Japanese Vehicles on Bench/ Boot

Alitentech KESS3 V1.91 upgrade is now available! Bench/ Boot Remap on Japanese Vehicles' Denso ECUs are added. Check out update info, all KESS3 with an [...]

Alientech KESS3 V1.90 Add Benelli, CF Moto, Kawasaki

Alitentech KESS3 V1.90 upgrade is now available! Bench Remap on Benelli, CF Moto, Honda, Kawasaki, Suzuki, and Yamaha Motorbikes are added. Check out [...]

Alientech KESS3 V1.89 Add ME7.6.2 EDC15C6 ESU-132

Alitentech KESS3 V1.89 upgrade is now available! Bosch ME7.6.2/ Bosch EDC15C6/ Siemens Sirus 81/ Hitachi BED501/ Lucas DCU3F/ Visteon ESU-132/ Bosch [...]

Alientech KESS3 V1.88 Add MG1UA008 MEG17.9.77 MG1US008

Alitentech KESS3 V1.88 upgrade is now available! Bosch MG1UA008/ MD1CS018/ EDC17C69/ MEG17.9.77/ ME17.9.21.1/ MG1US008/ MED17.8.21/ ME17.9.56 are [...]

How to Install Alientech KESS3 Software?

In this article, we are going to show you how to install Alientech Kess3 software. How to Install KESS V3 Software? Go to Alientech official website: [...]

Alientech Kess3 V1.86 Add Marelli MM10JA and IAW 11GF

Alitentech KESS3 V1.86 upgrade is now available! Reprogram on bench the Magneti Marelli MM10JA and IAW 11GF are added. Check out update info, all KESS3 [...]

Alitentech Kess3, FLEX, Autotuner: Which is Better?

In this article, we are going to compare 3 main ECU programming tools: Alitentech Kess3, FLEX, and Autotuner. Check out their pros and [...]

Alientech KESS3 V1.85 Add Magneti Marelli CFC333R CFC308

Alitentech KESS3 V1.85 upgrade is now available! Reprogram on bench the Magneti Marelli CFC333R and Marelli CFC308 are added. Check out update info, all [...]

Alitentech KESS V3 Protocol Activation New Year Sale

Alitentech KESS V3 is a great affordable tuning tool for beginners. It allows users to activate various protocols by their needs for their KESS3. Now it's [...]
error: Content is protected !!