Recently, some customers gave feedbacks about Lonsdor KH100 remote maker key programmer network connection errors. Here share the problems and solution offered by cardiagtool.co.uk engineer.
Error 1: When I use lonsdor kh100 to identify 7935 chip, it cannot connect to network. I try to connect some available hot spots, but also failed.
Error 2: I want to register kh100, but it just keeps searching for network. When I turn on the device, it keeps loading for several minutes. How to solve?
Cardiagtool.co.uk engineer solution:
For the errors above, please follow the guide as below to operate step by step.
Step 1: Download the repaired file of Lonsdor KH100 Put the file on the desktop of a computer.
Unzip the file and you will get two files.
Step 2: Turn off the device
Hold Down button for a few seconds and the press Power button once
The KH100 device will enter USB Disk Mode interface
Step 3: Connect KH100 key programmer to the computer and put those two files into the device
Step 4: Click OK button to reboot the device and you will see an update progress bar.
Lonsdor KH100 device will update automatically
Step 5: Check whether the device works or not after updating