Author: sales
Autel IM608 Read MQB Dashboard with APB130 Adapter Instruction
Autel APB130 Adapter allows users to read MQB dashboard data so immo data could be decoded for key programming.
This article is an instruction on how to use [...]
Free Download Renault Clip V227 Software
This article is about free Renault Clip V227 software, which supports Renault cars with CANBUS protocol after 2005.
Free Download Renault Clip [...]
Free Download V1.2.3.0 CGDI CG100X Software
V1.2.3.0 CGDI CG100X Software is released! Get free download link from Cardiagtool.
Free Download CG100X Software:
V1.2.3.0 CG100X
*After [...]
How to Refresh OBDSTAR X200 Pro2 Firmware?
Due to operating system switching, part of X200 PRO2 that prompts "Diag Abnormal exit! CODE:3" requires firmware refreshing before use.
So, here is about [...]
How is New Xhorse FT-OBD Toyota Key Programmer?
Xhorse FT-OBD Tool, a new handy Toyota key programmer, is released! It supports Toyota proximity programming up to year 2023.
Let's see what it could [...]
Bosch EDC16CP35 Read, Write, Checksum: CG FC200 or Flex?
This article is going to compare two ECU programmers on EDC16CP35 – CG FC200 and Flex.
We will see how they read, write, and checksum this [...]
3 Ways to Program Toyota/ Lexus 8A-BA Type 2022 2023 Key
How to program Toyota 8A-BA smart key 2022 2023? 8A-BA type is a tough one to handle due to the 30-pin port of its smart box.
In this article, we are going [...]
Lonsdor K518ISE Program 8A-BA 2022 Toyota Sienna AKL Instruction
Toyota/Lexus 2022- 8A-BA models key programming without PIN code was added to Lonsdor K518 Series on Aug 2nd, 2023.
*Toyota AKL License is [...]
Launch X431 7/8/10-Inch Diagnostic Tablet Comparison with XTOOL, Autel
Here we will compare Launch X431 7/8/10-inch tablets with competitions from XTOOL and Autel.
I.7-inch Wireless Tablets (XTOOL D7 vs. Autel MK808BT [...]
Autel IM608 2008 Grand Cherokee PCM Swap and IMMO Setup Guide
Here we have a 2008 Jeep Grand Cherokee. It sometimes won't start and has a secure light on dashboard when we turn ignition on. After scanning , the PCM module [...]
Free Download V1.2.1.0 CGDI CG100X Software
V1.2.1.0 CGDI CG100X Software is released! Get free download link form Cardiagtool.
Free Download CG100X Software:
V1.2.1.0 CG100X
*After [...]
Autel IM Tablet Possible to Program 2022 Sienna 8A-BA Key?
Question:
2022 Sienna 8A-BA Smart key.
Have anyone done it before? What test cable they are referring to?
Note that the smart box is TMLF19D which is [...]
How to Solve CG FC200 “Device Not Activated” Error?
One customer asked how to fix the error “Device not activated” or ”failed to connect to the server, check the net work or try again later” on CG FC200 [...]
Autel Ultra Tablet BMW 2012 F10 Used EGS Coding Guide
Here we are going to reset EGS from a BMW 2012 F10, after its transmission was swapped.
To swap a EGS, we can't only use Autel Ultra, because it is [...]
OBDSTAR X300 DP Plus/ Pro4 Add Toyota 4A & 8A-BA Model
More 4A & 8A-BA Toyota vehicles with 30-pin smart box are added into OBDSTAR IMMO Tablet. The new TOYOTA 30-PIN Connector allows users to work on Toyota [...]
Autel IM Tablet Support VW MQB48 NEC35XX Add Key
Now Autel IM Tablets support reading VW MQB NEC35XX dashboard chip with XP400PRO Programmer and new Autel APB130 Adapter.
New APB130 Adapter allows IM [...]
Free Download V1.2.0.0 CGDI CG100X Software
V1.2.0.0 CGDI CG100X software is available. Get free download link and update info from Cardiagtool.
Free Download V1.2.0.0 CG100X [...]
Autel IM608PRO II & IM508S Support BMW F-Series AKL by OBD
Add Key/ All Key Lost for BMW F-Series with BDC module by OBDII now is added to Autel IM608PRO II and IM508S.
No need to remove DMC [...]
Clone VAG Gearbox: Launch X431, OBDSTAR, or FoxFlash?
In this article, we are going to compare 3 tools to see how they clone VW gearboxes.
We will cover:
Launch X431 ECU&TCU Programmer
OBDSTAR [...]
Launch X-431 ECU & TCU Programmer Activation, Functions, Support List
Launch X-431 ECU & TCU Programmer is coming! Users are allowed to read/ write/ process/ checksum gearbox.
X-431 ECU & TCU Programmer is standalone, [...]