Best Toyota G chip copy machines recommendation: JMD Handy Baby, TJECU CN900mini + YS31 CN5 chip, Toyota G and Toyota H Chip Key Programmer, Smart Key Maker for Toyota G Chip and Lexus, OBDSTAR X100 Pro, BDSTAR X300 PRO3 .
JMD Handy Baby clone machine
TJECU CN900mini + YS31 CN5 chip
Toyota G and Toyota H Chip Key Programmer
OBDSTAR X100 Pro or OBDSTAR X300 PRO3
Smart Key Maker for Toyota G Chip and Lexus
- JMD Handy Baby clone machine add key for Toyota G chip
JMD Handy Baby clone machine is able to add key for Toyota G chip, but you have to pay additional €74 or buy JMD Handy Baby and G chip copy authorization together. And then supply the seller the machine serial number, they will send you an authorizing file to update.
€435 + shipping at cardiagtool.co.uk
- TJECU CN900mini + YS31 CN5 chip
TJECU CN900mini + YS31 CN5 chip (€207 in total) is another option to copy Toyota G Chip.
CN900mini is able to identify Toyota “G” chip key (year: 2010) (Chip: 4D-72).
Use tip: it will deduct one token when use TJECU CN900mini to copy one Toyota G chip. CN900mini is stored with 12 tokens, after it use up, you can email the supplier with the serial number and the machine prompt code, then you can gain 12 tokens for free, for the second time, the tokens will be charged.
TJECU CN900mini, price only €175 + shipping cost, free update at www.cn900.net
YS31 CN5 Toyota G Chip €32 5pc/lot
- Toyota G and Toyota H Chip Key Programmer
€22 free shipping at cardiagtool.co.uk
Apply to 4D67,68,72(G), support both G and H chip, test on 2015 Camry
Toyota Add Remote Control
Get in the car and close the door, insert the key and turn the key on, insert the device into OBD. After the sound (Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring ends, It’s OK.
Note: Switch is on the right (add remote control).
Toyota Add Transponder:
Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,
anti-theft light will be off later.
Note: switch is on the left.( add transponder)
Good feedback on Toyota G and Toyota H Chip Key Programmer:
It works perfectly fine, remote programming works as advertised, very simple, tested it on Toyota Highlander and Toyota Rav4. Separate key and remote on these cars that I tested. Remote section works perfect no problem tested on a 2009, 11, 15 Camry , RAV4 , Prius C
- Smart Key Maker for Toyota G Chip and Lexus
There is no need to install the driver and software for the key programmer; it is Secure, stable, fast.
Please use the normal key programmer read the data of 93C66/93C46/93C86, save the data and do the process next.
Take of the ECU Anti-theft module, and install the 93C66 eeprom IC to the Toyota right size adapter, then connect the USB with the computer, turn the function switch to Toyota G chip, then you can note the Indicator start shinny, then the process is success. Put the 93C66 back to ECU Anti-theft module, and after installed the Anti-theft module on the car, put in the first key, then take out the key once the Indicator off, and then out in the second key, do as the last process, after the Indicator off,, you can power on your car. You don’t need Synchronous operation.
Note: One time just can match one IC, not depend on the turn, key don’t far away from the Sensing area.
€105 + shipping cost at http://www.cardiagtool.co.uk/toyota-g-chip-and-lexus-smart-key-maker.html
- OBDSTAR X100pro / X300 pro3 add key for Toyota G chip
OBDSTAR X100pro and X300 pro3 can add key on Toyota G chip.
VIOS immobilizer(with G)
Key chip 4D60(93C66)
RAV4 immobilizer (with G)
Tundra immobilizer (with G)
Other immobilizer (with G)
OBDSTAR tool update frequently, for newest coverage, advice you click www.obdstar.com, then ‘Testable’, then ‘X-100 Pro – EEPROM ADATPER’ , press ‘Ctrl + F ‘ and input ‘Toyota’ to find more.
How to use OBDSTAR X100pro / X300 pro3 to add key on Toyota G chip?
Connect X100pro / X300 pro3 to the EEPROM PIC 2-in-1 adapter, then take apart the immobilizer box and initialize data to add key. 93C66 for example, find out the exact chip e.g 93C66 then connect it with X100 pro, click option 93C66 then put back the chip and go on add key.