Auto ECU Programmer
Free Download WinOLS V4.7 Tuning Software
WinOLS is a professional program designed to modify ECU data. Here we share with you V4.7 WinOLS software to assist you with PCMtuner or KT200 [...]
KT200 New Support PSA EDC16C3 MPC556 PINOUT
This article is going to show you a new pinout of KT200 ECU PROGRAMMER - PSA EDC16C3.
PSA EDC16C3 PINOUT:
+12V - D1& G1
GND - [...]
V22.10.01 KT200 Software “New version found, start updating” Solution
Question:
Opened V22.10.01 KT200 software, tried to update but it said "New version found, start updating !", how to update or fix this [...]
How to Clone VAG EDC17CP20 by KT200 without Opening ECU?
Purpose:
To clone VAG EDC17CP20 on bench without opening ECU.
Tool:
KT200 Auto Version
Procedures:
Go [...]
Solved! KT200 Read Volvo Penta EDC7UC31 Failed
One customer gave feedback that his KT200 can't read Volvo Penta EDC7UC31.
Here Cardiagtool shares the
Reason:
K-Line is not [...]
Autel IM508/ IM608 Ford Ecosport ID49 Add Key Step-by-step Guide
This is a step-by-step guide on Ford Ecosport ID49 key adding using Autel IM508/IM608.
Procedures:
Go to
IMMO>>Ford>>Manual [...]
Can KT200 Read/ Write Mercedes CRD2.35 Delphi?
Question:
KT200 ECU Tool couldn't read it somehow, I made a Jtag, all the connections are ok, but it can't connect.
Here Cardiagtool [...]
KT200 Software Common Errors and Solutions
Here we have collected several common errors about KT200 Software. We'll cover:
1.Can't connect to server
2.Diagnose detect problems
3.Time zone [...]
KT200 V22.10.01 Software Unable to Select Driver Solution
Question:
Installed the latest V22.10.01 KT200 software, but "Select Driver" is grey and won't respond.
Here Cardiagtool shares [...]
KT200 PSA EDC17C60 TPROT Correct Automatically or Manually?
Question:
To do Adblue OFF on Ecd17C60 (PSA) KT200 Correct Tprot automatically or do you have to do it manually?
Here Cardiagtool Tech [...]
How to Test KT200 Bench Box Good or Not?
This article is going to guide you how to test if KT200 ECU Programmer Bench Box works well.
Connect KT200 and Bench Box to PC.
Run [...]
Yanhua ACDP Module 27 for DME Clone and ISN Read/ Write
Yanhua ACDP Module 27 is designed for
1)Read/ Write ISN
2)DME Clone
of BMW MSV80/ MSD8X/ MSV90 without dissembling module.
Support [...]
Best ECU Programmer: KT200 or CG FC200?
KT200 ECU Programmer is a master tool with Bench/ Boot/ BDM/ KTAG/ OBD mode. Here we will compare it with CG FC200 ECU Programmer, to see which is better for [...]
dFlash Tool for PCR 2.x Simos8.x Support List
Another ECU tool from PCMtuner team is coming - dFlash Tool for PCR 2.x Simos8.x, which is designed for Read/ Write PCR 2.x/ Simos8.x/ MED17/ EDC17/ MED9 ECUs [...]
KT200 Software Installation Update Driver Fail Solution
To install KT200 Software, we need to install program and then install driver. (If you don't know how to install, please check Installation Guide [...]
KT200 ECU Programmer Master Version Comparison and ECU List
New KT200 ECU Programmer Master Tool, with checksum calculation, is equipped with Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear [...]
Can Yanhua BMW FEM/BDC Clip Work with Other Programmers?
During BMW FEM/BDC Programming, a clip that can read eeprom without soldering is a good choice.
Yanhua FEM/BDC Programming Clip is designed [...]
Free Download MPM Plug V4.13.7 Software and Activation Instruction
MPM ECU&TCU Chip-Tuning Tool for GM comes with old v4.10 software, here we have the latest software V4.13.7 for you to choose, which works perfect with MPM [...]
How to Clone GM 6L50 Gearbox by Yanhua ACDP Module 22?
Yanahua ACDP Module 22 is designed to work with ACDP Host to clone GM 6L/6T series gearbox without soldering.
Support List:
6L series: 6L45, [...]
Godiag GT107 DSG Gearbox Adapter Support List, Connection and Pinouts
GT107 DSG Gearbox Adapter Kit is designed for Read/ Write GT107 DSG Gearbox (DQ250, DQ200, VL381, VL300, DQ500, DL501 etc.) with PCMtuner module 58/Kess V2/KTM [...]