It’s confirmed that Xhorse APP can be used for CONDOR XC-MINI & XC- MINI Plus now!
The new Xhorse APP supports the key cutting machine with the first four digit code of the serial number: “KM03” and “KM05”.
How to use CONDOR MINI Plus with Xhorse APP?
1.Please upgrade the firmware and Xhorse APP to the latest version:
-KM03 firmware version 6.1.3 (APP version 1.9.4)
-KMO05 firmware version 3.1.3 (APP version 1.9.4)
2.Run Xhorse APP on mobile phone
Press Switch device to select the key cutting machine (Mini Plus)
Enter Mini Plus home page
Tap Select to connect smart phone with Mini Condor Plus via Bluetooth
When connect successfully, you can cut key by the following steps.
Here take Hero 1082 as an example
Select All Key Lost-> Hero-> Input model 1082-> press Query
M1 Clamp shoulder align, this type recommend use 1.5mm to cut
Clean metal debris and press the key blank with your fingers to ensure smooth operation
Then press Cutting key
Pay attention to the prompt message, press Continue
Start to cut the key, and it will take 1 or 2 min to cut in the whole process
Cut the new key successfully
Insert it into cylinder to test whether it can work or not
fyi
Xhorse APP download:
There are 2 ways to download App: Scan the QR code or download App from Google Play store
1)Xhorse App QR code
2)In mobile phone (Android or iOS system), search “Xhorse” in Google Play Store
July Big Sale: Get 6% off automatically
Order over 799 EURO, and get a free 9 in 1 Ad-blue emulator