FoxFlash ECU Programmer
Top 3 ECU Programmers to Read Clone Recover ACDELCO E98
One customer gave feedback that he did not know how to read ECU E98 using Xhorse Multi Prog. The tool asked him to unlock to read but he had no idea about [...]
Top 3 to Clone Opel Bosch PSG16 by Bench/ OBD Mode
One customer asked us what tools would read write Opel PSG16 via OBD.
So, here we are going to share with you top 3 tools to clone this [...]
FoxFlash Possible to Read M7.9.8 Bench or Boot Mode?
One customer wondered if Original FoxFlash is possible to M7.9.8. Is it possible for FoxFlash to read this ECU without opening?
The only method is BOOT [...]
FoxFlash Read Mazda Denso SH1.x with OTB Adapter No Issue
With new OTB Adapter, FoxFlash users could read data on OBD mode but using Bench pinout.
Here is a review of FoxFlash OTB Adapter:
Foxflash with OTB mode [...]
FoxFlash Update Add TCU GEARBOX TRW EMS
Original FoxFlash adds more TCU GEARBOX TRW EMS.
TCU GEARBOX TRW EMS
FoxFlash Dev team is working on following operations:
Bench Beta Version [...]
FoxFlash New Update OTB 1.0 Adapter for OBD/ Bench Mode
New FoxFlash OTB 1.0 Adapter is coming! It works with engine, TCU, ACM, and DCM module.
Supported functions:
1.Dual-channel high-speed [...]
FoxFlash Add Delco Bosch Siemens Phoenix Tuning and New Clone
Original FoxFlash adds Delco Bosch Siemens Phoenix Tuning and New Clone Function!
New Clone Function Info:
MEDC17
FCA
HYUNDAI
JAGUAR
LAND [...]
FoxFlash Add Unlock Patch GPEC2 GPEC2A via OBD
Original FoxFlash now is able to unlock patch GPEC2 GPEC2A via OBD.
Continental GPEC2 & GPEC2A Support List:
Jeep 2.4 Tigershark 184 hp
Jeep [...]
How to Quickly Identify ECU Type on FoxFlash Manager?
Question:
2010 Ford Ranger could read obd but straight forward bench using Original FoxFlash.
Is there a page or list to help users identify [...]
How is FoxFlash ECU Programmer for Ford 6DTC Powershift?
One customer wondered where to find pinout of 6DCT450 TCU Ford on FoxFlash Software. FoxFlash supports Ford powershift or not?
Here is all 6DCT [...]
FoxFlash Fix MED17 Checksum for TC1766 TC1793 TC1797
More MED17 checksum on Original FoxFlash are fixed on September 14, 2023.
Update Info:
Checksum for MCU TC1766 TC1793 TC1797 TC1724F [...]
FoxFlash Add BMW MINI MEVD17.2.7 Bench Read/ Write
BMW MINI MEVD17.2.7 is added into FoxFlash ECU Programmer on Sept. 6th, 2023!
Support List (Bosch MEVD17.2.7):
BMW--Bosch MEVD17.2.7--Bench/ [...]
FoxFlash Read Manual Calculator Renault Sagem S3000 Tips
One customer gave feedback that he had a software problem to read manual calculator s3000. He connect module to FoxFlash Tool exactly the same as [...]
How to Solve FoxFlash/ KT200 Software Crash during Data Reading?
One customer gave feedback that FoxFlash software would crash while it was reading ECU. Tried to read data again, software would still [...]
FoxFlash/KT200 Read Mercedes CRD3.1 on Bench Tips
Original FoxFlash/ KT200 supports R/W Delphi CRD3 series ECU including CRD3, CRD3.1x~3.7x, CRD3.xx, CRD3.E1, etc.
Here we will show you some tips on reading [...]
Solved! FoxFlash Write 2015 Dodge GPEC2A “Chksum Never Supported”
One customer gave feedback that he needed to remove security off the 2015 Dodge computer but his FoxFlash Programmer can't. When he wrote back data, software [...]
FoxFlash Update on Isuzu EDC17C83 Bench/Boot Protocol
FoxFlash released a new Bench protocol for Isuzu EDC17C83. Take a look at the details!
ECU:
Isuzu EDC17C83 TC1793
Supported [...]
FoxFlash ECU Programmer Read TCU DQ200 Tips
One customer asked if it is possible to run TCU DQ200 with FoxFlash Programmer.
The answer is Yes, and here are some tips you may [...]
FoxFlash ECU Programmer Possible to Clone Mercedes VGS3
Question:
VGS3 cloning, is it possible for FoxFlash ECU Programmer? And it will need also Vediamo programming or just clone and run?
Answer:
Yes, [...]
FoxFlash R/W Fiat IAW 10GF in Bench Test Success
Original FoxFlash is a professional tool in ECU tuning.
On the list, there is no Fiat 10GF, but here is a successful test of Fiat [...]