One customer asked if it is possible to run TCU DQ200 with FoxFlash Programmer.
The answer is Yes, and here are some tips you may need.
PINOUTs:
1)Bench mode (0AM, 0CQ/ 0AM, 0CW)
2)Boot mode
If Bench mode fails,
1.Try Boot mode.
2.Use 13.5V and Do Not use GODIAG, connect direct.
3.Try this pinout, power supply on the 4 big pines (worth a try)
Hope this could help!
Skype: cardiag.co.uk
WhatsApp: https://wa.me/8615002705698