I bought xtool x100 pad2 at cardiagtool.co.uk recently.
It cost me 815 euro with free shipping. I’m so happy, all the goods kept well when I received.
The specific operation steps as below, we go one by one.
1.Open Xtool pad2 main menu
Select “VW/AUDI/SKODA/ SEAT” -> “4th/ 5th Immobilizer system”-> “5th Immobilizer system”-> “1.Read immokey data”
Enter a filename to save the immokey data
Turn the ignition on and then click “OK”
Read data successfully
2.Select “2.Show immokey data”
Security data showed below: incl. VIN, key number, etc.
3.Select “3.Make dealer key”
Follow the prompt to plug the KC100 into tablet, and press [OK] to continue
Loading firmware…
Put a key that able to start car to coil, and click “OK”
Put a key that ready to add to coil
Writing key…
Create dealer key success
4.Select “Match the key”
Follow the prompt to turn on the ignition
Click “OK”
Pay attention to the prompt:
When the car to identify the key, the key will be auto locking (and can’t unlock), whether or not to continue to learn the key.
I aimed the key at the back of the key identification mark area, close to open the ignition switch to identify the key
Learning success
Click “OK” and exit the key learning
Test successfully
That’s all. Hope it helps you!