AutoTuner has released a new protocol for the KEFICO SIM2K-510 engine ECU, bringing OBD VR read and write capabilities to supported Hyundai and Kia 1.6 CRDi diesel vehicles.
The new protocol covers selected vehicles equipped with the 1.6 CRDi engine, including 116 hp and 136 hp versions, as well as 48V mild-hybrid (MHEV) variants. With this update, you can perform ECU calibration reading and writing directly through the diagnostic port.

KEFICO SIM2K-510 Protocol Details
The SIM2K-510 ECU is based on the Infineon AURIX TC297 microcontroller and is used in selected Hyundai and Kia diesel applications.
Key protocol specifications
| Feature | Details |
|---|---|
| ECU | KEFICO SIM2K-510 |
| MCU | Infineon AURIX TC297 |
| ECU Type | Engine Control Unit (ECU) |
| Programming Mode | OBD VR |
| Alternative Method | OBD VR over Bench for CAN ECUs |
| Read | Calibration |
| Write | Calibration |
| Write Time | Approx. 4 min 30 sec |
| Write Time with Unlock | Approx. 8 min |
| Checksum | Checksum correction supported |
Supported Hyundai and Kia Vehicles
The protocol covers selected 1.6 CRDi diesel models with 116 hp and 136 hp engines, including 48V mild-hybrid versions.
Hyundai
Hyundai i30/ Hyundai i40/ Hyundai Kona/ Hyundai Tucson
Kia
Kia Ceed/ Kia Proceed/ Kia XCeed/ Kia Optima/ Kia Stonic/ Kia Sportage
OBD VR Read and Write
With the new SIM2K-510 protocol, supported ECU calibration files can be read and written through the OBD diagnostic port using AutoTuner Tool.
For CAN ECUs, the protocol also supports OBD VR over Bench, offering an alternative connection method where applicable.
The protocol includes checksum correction, helping streamline the ECU programming workflow.
AutoTuner SIM2K-510 Programming Times
- Standard write operation: approximately 4 minutes 30 seconds
- Write operation with unlock: approximately 8 minutes
The KEFICO SIM2K-510 protocol expands AutoTuner’s ECU programming coverage for selected Hyundai and Kia 1.6 CRDi diesel vehicles.



