Lonsdor K518ISE Key programmer is tailored and perfect for vehicle locksmith. It supports Immobilization, Odometer adjustment, Free BMW FEM key programming etc.
Here share how to use Lonsdor K518ISE to Read Pin code & Program remote key for Peugeot 407 2007.
Prepare:
Car: Peugeot 407 2007
Device: Lonsdor K518ISE Key Programmer
Others: Car key
Main steps:
Step 3: Reprogram remote control
Procedures:
Connect LONDSOR 518ISE to the vehicle via OBD
Insert blank key into the car and turn on the ignition switch
Enter LONDSOR 518ISE Menu
Go to Immobilization-> Peugeot -> Read Pin Type-> Type 2
Downloading application…
Note: During function operation: [wiping brush], [big lights often illuminate] is normal. To stop brush wiping, please check Help, and pull out the corresponding fuse.
Then click “OK”
Switch ignition on, and then click “OK”
Lonsdor K518 read vehicle information
Reading data…
Verifying PIN code…
Read pin code success
Return to LONDSOR 518ISE home page
Click Select from vehicle-> 407-> Immobilizer-> Program key
Switch ignition on
And then click “OK”
Confirm the related info and then click “OK”
Input PIN code
Make sure the input is correct and press “OK”
Finish the following operations within 15sec: Switch off and on ignition, [OK] to continue
Note: Programming complete. Program next key?
Click “Cancel”
Step 3: Reprogram remote control
Follow the prompt to reprogram remote control
1.Switch ignition off and remove key
2.Insert a key and switch ignition on.
3.Within 20 sec, press any button of remote control for 10 sec and then release.
4.Switch ignition off and remove key.
5.For more keys, repeat steps 2-4. [OK] to return.
Program Peugeot 407 remote key success
Job’s done!