Any Possible Ways to Program Key for VW MQB System?

In the near future, many new ways for VW MQB key programming will be released. Here we collect 3 available ways for you, and each of them has their own features.

any-possible-ways-to-program-key-for-vw-mqb-system-1

1.Xhorse

VVDI Key Tool Plus/ VVDI PROG+VVDI2 VW MQB functions are updated with MQB48 License.

Tools could read NEC35XX chips in dash out, then with buying synchronization data if AKL, we could program new keys.

any-possible-ways-to-program-key-for-vw-mqb-system-2

Don’t have to buy immo data + sync data, and many used dash may be reused, which will reduce a great cost

However, until next week if JCI, Virtual Dash, or RH850/V850 is supported is not sure yet

2.PolDiag

PolDiag MQB Locked NEC device supports AKL of VAG MQB Cluster with Renesas / NEC35xx mcu, and also to change the Immo data and adjust the mileage saved in the clusters.

any-possible-ways-to-program-key-for-vw-mqb-system-3

Supported Dash:

VDO

JCI (JOHNSON CONTROL)

VISTEON

Supported MCU:

A2C81589600,

A2C81589700

A2C81589800

NEC:

D70F3525

D70F3526

D70F3529

D70F3532 New BGA

D70F3537 (BGA)

and all other 35xx

NOT Supported:

–Clusters with RH850 MCU like R7F7…

–Clusters with NEC D70F3426A + ext eep

3.Abrite

Abrites RH850/ V850 programmer could read immo data from dash (both Virtual cockpit and regular) with RH850/ V850 processors, also support adaptation of above dash.

any-possible-ways-to-program-key-for-vw-mqb-system-4