Author: sales
Yanhua ACDP Module 27 for DME Clone and ISN Read/ Write
Yanhua ACDP Module 27 is designed for
1)Read/ Write ISN
2)DME Clone
of BMW MSV80/ MSD8X/ MSV90 without dissembling module.
Support [...]
Autel MaxiSys MS906 Touch Screen No Response after Screen Replacement
One customer gave feedback that his Autel MaxiSys MS906 wont response to any clicks on the touch screen after replacing it.
Her Cardiagtool [...]
Free Download Ford IDS V127 + Mazda IDS V127
The latest V127 IDS software supports programming and diagnosis of Ford and Mazda from 2005 to 2022, which could work with VCM II, VXDIAG Ford [...]
Best ECU Programmer: KT200 or CG FC200?
KT200 ECU Programmer is a master tool with Bench/ Boot/ BDM/ KTAG/ OBD mode. Here we will compare it with CG FC200 ECU Programmer, to see which is better for [...]
Autel MK906PRO vs Autel MK906 BT vs Autel MS906PRO
Autel MaxiCOM MK906PRO is designed for offering a performance-boosting tool for workshops and DIYers with upgraded firmware.
MK906PRO vs MK906BT [...]
Free Download Scania VCI3 Software V2.51.1.43 SDP3 and Installation Guide
Scania VCI3 with V2.51.1.43 SDP3 is designed for full maintenance of Scania trucks.
Free Download Scania Software from Cardiagtool:
V2.51.1.43 [...]
Super MB PRO M6 Firmware Update Error Code 661 Solution
One customer gave feedback that his Super MB PRO M6 could not communicate with his car.
Here Cardiagtool gave the
Solution:
Step [...]
KT200 Software Installation Update Driver Fail Solution
To install KT200 Software, we need to install program and then install driver. (If you don't know how to install, please check Installation Guide [...]
How to Register Autel MaxiCOM Ultra Lite?
This article is a guide on how to register Autel MaxiCOM Ultra Lite.
This article is a quick guide on how to register Autel MaxiCOM Ultra [...]
Xhorse VVDI XT27B Super Chip Support List and Comparison
New VVDI XT27B Super Chip is coming! As the upgraded version of VVDI XT27(A) Super Chip, it newly adds ID47/49/4A/MQB and optimize ID46 & PCF7935 [...]
Fixed! SVCI J2534 Ford IDS V125 Module Programming “Selection not available”
One customer gave feedback that Ford IDS V125 did not allow him to enter Module Programming menu. He was using SVCI J2534, and the prompt is "Selection not [...]
KT200 ECU Programmer Master Version Comparison and ECU List
New KT200 ECU Programmer Master Tool, with checksum calculation, is equipped with Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear [...]
How Autel IM608 Clone 2006 Ford Ecoline E-series Cluster?
Here we are going to show you how to Clone/ Swap a cluster from a 2006 Ford Ecoline E-series van using Autel IM608 Programmer.
Difference due [...]
Can Autel IM508/IM608 Generate IKEY Universal Remote Instead of KM100?
Question:
Apart from Autel KM100 Key Programmer, can Autel IM508/IM608 generate Autel IKEY Universal Remote as well?
Answer:
Yes, Autel [...]
Can Yanhua BMW FEM/BDC Clip Work with Other Programmers?
During BMW FEM/BDC Programming, a clip that can read eeprom without soldering is a good choice.
Yanhua FEM/BDC Programming Clip is designed [...]
Free Download MPM Plug V4.13.7 Software and Activation Instruction
MPM ECU&TCU Chip-Tuning Tool for GM comes with old v4.10 software, here we have the latest software V4.13.7 for you to choose, which works perfect with MPM [...]
How to Clone GM 6L50 Gearbox by Yanhua ACDP Module 22?
Yanahua ACDP Module 22 is designed to work with ACDP Host to clone GM 6L/6T series gearbox without soldering.
Support List:
6L series: 6L45, [...]
Yanhua FEM/BDC Special Programming Clip for 95128/95256 No Soldering
Yanhua FEM/BDC Special Programming Clip is designed for pre-processing BMW FEM/BDC module.
Support FEM/BDC EEPROM [...]
Godiag GT107 DSG Gearbox Adapter Support List, Connection and Pinouts
GT107 DSG Gearbox Adapter Kit is designed for Read/ Write GT107 DSG Gearbox (DQ250, DQ200, VL381, VL300, DQ500, DL501 etc.) with PCMtuner module 58/Kess V2/KTM [...]
Solved! Autel MK808TS Automatically Turn Off after MaxiCOM Icon Display
One customer gave feedback that his Autel MK808TS automatically turned off after it showed the "MaxiCOM" icon on screen.
Here Cardiagtool [...]