Auto ECU Programmer
How to Use FoxFlash Software at 6 Computers?
Dear FoxFlash Customers:
Now V1.3.0 FoxFlash Manager is available now, which allows you to run the software on 6 computers at most.
If you [...]
Is BDM CMD/Alien Adapter Compatible with FoxFlash BDM Mode?
Some customers wondered if their BDM adapters are compatible with FoxFlash BDM mode.
Here Cardiagtool tech
Answer:
Any BDM probe compatible [...]
KT200 Possible to Read Valeo VD46 SH72546R on Bench?
Question:
KT200 Tool can't read that ecu!!! Valeo VD46, possible to read it?
Answer:
VD46 is different from V46, the processor is SH725 and no [...]
KT200 Read Old EDC16C34 in BDM No Welding Success
This is a review of KT200 on old EDC16C34:
Reading an old edc16c34 calculator in bdm with ktag bosch adapter to avoid welding.
Eeprom/Flash reading [...]
Free Download FoxFlash Software and Installation Guide
This article is going to share with you the latest software of new chip tuning tool FoxFlash and how to install it.
Free Download FoxFlash Software from [...]
KT200 Possible to Read Honda CRV 2010R EDC17CP16 Password on Bench?
Here is a review of KT200:
Honda crv 2010r edc17cp16 bench read failed... is possible to read write on bench?
Make sure the ECU is CP16 and [...]
Free Download V3.0.1 ECUhelp Software for ECU Tuning
Here we share the latest ECUhelp software for ECU tuning. This software could work with your ECU Programmers including PCMtuner, KT200, ECU Bench [...]
ECU Programmer Comparison: KT200 vs FoxFlash
New ECU Programmer FoxFlash will be released soon, what is the difference compared to similar KT200 Tool? Here we are going to show you.
KT200 VS [...]
How to Read VAG SIMOS18/ SIMOS12 by KT200?
This article is going to show you how to R/W SIMOS18/ SIMOS12 using KT200 ECU Programmer.
Simple Guide:
1.Find Password
2.R/W MICRO + [...]
Free Download V22.11.01 KT200 Software
V22.11.01 KT200 software is released! Get free software from Cardiagtool.
Free Download:
V22.11.01 KT200
KT200 PINOUT
How [...]
Free Download WinOLS V4.7 Tuning Software
WinOLS is a professional program designed to modify ECU data. Here we share with you V4.7 WinOLS software to assist you with PCMtuner or KT200 [...]
KT200 New Support PSA EDC16C3 MPC556 PINOUT
This article is going to show you a new pinout of KT200 ECU PROGRAMMER - PSA EDC16C3.
PSA EDC16C3 PINOUT:
+12V - D1& G1
GND - [...]
V22.10.01 KT200 Software “New version found, start updating” Solution
Question:
Opened V22.10.01 KT200 software, tried to update but it said "New version found, start updating !", how to update or fix this [...]
How to Clone VAG EDC17CP20 by KT200 without Opening ECU?
Purpose:
To clone VAG EDC17CP20 on bench without opening ECU.
Tool:
KT200 Auto Version
Procedures:
Go [...]
Autel IM508/ IM608 Ford Ecosport ID49 Add Key Step-by-step Guide
This is a step-by-step guide on Ford Ecosport ID49 key adding using Autel IM508/IM608.
Procedures:
Go to
IMMO>>Ford>>Manual [...]
Can KT200 Read/ Write Mercedes CRD2.35 Delphi?
Question:
KT200 ECU Tool couldn't read it somehow, I made a Jtag, all the connections are ok, but it can't connect.
Here Cardiagtool [...]
KT200 Software Common Errors and Solutions
Here we have collected several common errors about KT200 Software. We'll cover:
1.Can't connect to server
2.Diagnose detect problems
3.Time zone [...]
KT200 V22.10.01 Software Unable to Select Driver Solution
Question:
Installed the latest V22.10.01 KT200 software, but "Select Driver" is grey and won't respond.
Here Cardiagtool shares [...]
KT200 PSA EDC17C60 TPROT Correct Automatically or Manually?
Question:
To do Adblue OFF on Ecd17C60 (PSA) KT200 Correct Tprot automatically or do you have to do it manually?
Here Cardiagtool Tech [...]
How to Test KT200 Bench Box Good or Not?
This article is going to guide you how to test if KT200 ECU Programmer Bench Box works well.
Connect KT200 and Bench Box to PC.
Run [...]