Auto ECU Programmer
KESS3 Master with Car OBD Bench Boot Protocols Only 3690Euros!
KESS3 Special Offer Last 5 days!
Kess3 Master + Car OBD Protocol + Car Bench& Boot Protocol + One-year Subscription = 3690 Euros
The original [...]
OBDSTAR DC706 Add Toyota Gen3 Gen4 into ECU Clone
OBDSTAR DC706 is scheduled to update Toyota Gen3 and Gen4.
Then DC706 ECU Clone function will cover Toyota 1st generation to 4th Generation.
Check [...]
OBDSTAR G3 Read 2020- Fiat Hybrid BCM IMMO Data Instructions
In this article, we will show you how to read 2020- Fiat Hybrid BCM IMMO Data using OBDSTAR X300 Classic G3.
Steps:
Connect OBDSTAR G3 to [...]
Alientech KESS3 V2.07 Add Scania Truck Motorola EMS10
Alientech KESS3 V2.07 update is available now!
Reprogram Trucks
Denso 275700-8203 and Denso 275700-4501 ECUs (with cloning available) on Ashok Leyland [...]
How to Read Mercedes-Benz EIS Motorola MCU?
Question:
How to read Mercedes-Benz EIS Motorola MCU? I did not find an option to read the motorola 2D59j mcu on Xhorse VVDI PROG.
Here is [...]
Opel E98 ECU Recovery with OBDSTAR DC706 Success
Here we are required to recover an Opel E98. We tried writing the ECU with Xhorse but it failed, so we will use OBDSTAR DC706.
All the way straight to E98 [...]
How to Fix KESS3 OBD Read SID305 “Change of status not performed”?
Question:
Alientech KESS3, trying to read a Renault Megane III 2010, Continental SID305 through OBD (only obd and boot available), but I only get the [...]
OBDSTAR G3 Clone Ford Transit Custom 2018 BCM
Here comes a review of OBDSTAR G3 cloing BCM:
Users could buy ECU Cloning License to Activate function in G3, making it own the same ECU function as [...]
Read EDC17CP11 with GODIAG GPT on DC706 and Multi Prog
Here comes a review of GODIAG GPT Boot Adapter:
Reading Bosch ECU with Godiag GTP on OBDSTAR DC706 and Xhorse Multi-Prog.
ECU
Land Rover [...]
Alientech KESS3 V2.06 Add BMW Motorbike Yamaha Bike&Marine
Alientech KESS3 V2.06 update is available now!
Motorcycles.
Bench - Bosch ME17.2.42 BMS-ME and Mitsubishi 1TD/18P/2LS-8581A-XX ECUs from BMW Motorrad and [...]
Mercedes W222 A/C Control Unit Programming using CG100X
Here we got a Mercedes W222 2018 and we need to remove the old A/C control unit and install a new one.
First, we need to read the Renesas [...]
Best ECU Tools to Read PSA DCM6.2C
Here comes a review of Xhorse Multi Prog working on PSA DCM6.2C:
Read and write a PSA DCM6.2C in boot successfully with online CKS calculation... But it [...]
CG100X Hyundai SANTA FE 2020 Odometer Correction Review
Here comes a review of CGDI CG100X on odometer correction:
Used CG100X to do mileage reduction or repair, doesn’t corrupt the data or the MCU!
Connect [...]
BOSCH M3.8.3 VAG ECU IMMO OFF Manual Solution
Question:
Best tool and adapter to read this? Never desolder before, m3.8.3 golf ecu need immo off
Here is the manual solution to immo [...]
Alientech KESS3 Boot Read Isuzu Transton 4HK1 Tips
One customer gave feedback about Alientech KESS3:
Finally had a go at booting a transton, getting the no ID error so something isn’t right but everything [...]
Alientech KESS3 V2.05 Add DTC Feature
Alientech KESS3 V2.05 update is available now!
The new “DTC" feature of KESS3 allows you to view and reset DTCs in a car or motorcycle.
Through the [...]
OBDSTAR DC706 Read VW Jetta 2011 CS and Pin Code Review
Except for cloning ECU, OBDSTAR DC706 would pull out CS and PIN code for VW key programming via IMMO Data Decryption.
Here comes a review of DC706 pulling [...]
GODIAG ECU GPT Boot Adapter Unlock PCR2.1 Review
Here comes a review of GODIAG ECU GPT Boot Adapter.
Here we have a Continental PCR2.1 from Audi A1.
We can easily unlock it using Scanmatik [...]
How OBDSTAR G3 Clone Hyundai CPEGD2.20.3 on Bench?
With ECU/ TCU Cloning License, OBDSTAR X300 Classic G3 have the same ECU function as OBDSTAR DC706.
Here we will show you how OBDSTAR G3 clone Hyundai [...]
Alientech KESS3 V2.04 Add Bosch ZF AL551/ 8HP55/ ES10-1002
Alitentech KESS3 V2.04 upgrade is now available!
Bosch ZF AL551/ 8HP55/ ES10-1002 is added.
Stay one step ahead of the competition and keep your KESS3 [...]