Comments Off on OBDSTAR X300 Classic G3 vs. Autel IM608
In this article, we will compare the new OBDSTAR X300 Classic G3 to the Autel IM608.
See what we have got in G3 and where it works better or inferior than [...]
Comments Off on Alientech KESS3 V2.03 Add Keihin A6244103100 RH850
Alitentech KESS3 V2.03 upgrade is now available!
Keihin A6244103100 RH850 on KTM Super Duke R 1390 via OBD are added.
Make sure your KESS3 is in an [...]
Comments Off on Alientech KESS3 Read ISUZU Transtron on Boot Mode Tips
Quick Question:
Alientech KESS3, has anyone got any tips on soldering to these Transtron chips for boot mode, I see some people use clips but they aren't [...]
Comments Off on Alientech KESS3 V2.02 Add SIM2K-140 SIMK42 ME7.9.41
Alitentech KESS3 V2.02 upgrade is now available!
Five new BOOT protocols -- SIMK42 5WY1xxxx, AN470, SIM2K-140, ME7.9.41, and M79 -- are added.
Make sure [...]
Comments Off on Alientech KESS3 V2.00 Add DCU17PC43 from Ford via OBD
Alitentech KESS3 V2.00 upgrade is now available!
BOSCH DCU17PC43 from Ford via OBD are added.
Make sure your KESS3 is in an active subscription and enjoy [...]
Comments Off on Must GM E39 with Different Service Numbers Match before Clone?
Purpose:
Have some GM ECM to clone using OBDSTAR DC706.
Do the Part number and Service Number need to match exactly?
My 2 E39 have different service [...]
Comments Off on Alientech KESS3 Read Mercedes BOSCH ME2.1 Tips
One customer asked how to read Mercedes BOSCH ME2.1 using Alientech KESS3.
Here are three ways to read this ECU:
1) By linking together Pin 1 and Pin [...]
Comments Off on Alientech KESS3 V1.99 Add Mitsubishi ECU
Alitentech KESS3 V1.99 upgrade is now available!
Mitsubishi ECUs in Kawasaki, Suzuki, and Yamaha on Bench Mode are added.
Check out update info, KESS3 [...]
Comments Off on GODIAG GPT Boot Adapter Better than OBDSTAR P004?
GODIAG GPT Boot Adapter with resistors built in is designed for Read/ Write ECU.
Confirmed:
To connect wires to OBDSTAR G3/ DC706, GODIAG GPT Boot [...]
Comments Off on Alientech KESS3 V1.98 Add Siemens SIM4LKE Siemens EMS2214
Alitentech KESS3 V1.98 upgrade is now available!
Siemens SIM4LKE Siemens EMS2214 on BOOT Mode are added.
Check out update info, KESS3 with an active [...]
Comments Off on OBDSTAR DC706 Read GPEC2A PCM on Bench/ Boot Tips
One customer gave feedback about OBDSTAR DC706 working on GPEC2A:
Having some issues reading flash on GPEC2A PCM... I have made all connections as [...]
Comments Off on Alientech KESS3 V1.97 Add Isuzu N-Series Truck Denso 276700-2051
Alitentech KESS3 V1.97 upgrade is now available!
Isuzu N-Series Truck Denso 276700-2051 on Bench Mode are added.
Check out update info, KESS3 with an [...]
Comments Off on OBDSTAR DC706 April 2024 Update Add MEG17.9.8 MEDG17.9.8
OBDSTAR DC706 ECU Tool April 2024 Update is available!
New version adds Hyundai/ KIA KEFICO MEG17.9.8 TCM(R5F72549R), Hyundai/ KIA KEFICO MEDG17.9.8 [...]
Comments Off on Alientech Kess3 V1.96 Add JCB Delphi DCM7.24 BOOT Mode
Alitentech KESS3 V1.96 upgrade is now available!
Tuning and Cloning Delphi DCM7.24 for JCB on BOOT Mode are added.
Check out update info, all KESS3 with [...]
Comments Off on Is POWERGATE The Phone Version of KESS3?
Alientech released a new ECU and TCU programmer for cars and motorcycles -- POWERGATE.
One customer asked if POWERGATE Tuning Tool is the phone version of [...]
Comments Off on Alientech Kess3 V1.95 Add Denso 112731-5040 and 33910-79JX/57KX
Alitentech KESS3 V1.95 upgrade is now available!
Remap and clone on bench the ECU Denso 112731-5040 and Denso 33910-79JX/57KX for Subaru and Suzuki are [...]