This article is to share the customers with the CG100 PROG III Mileage Repair Tutorials for Honda Accord .
Operation Steps:
Connect the device correctly, make sure it works OK.
Here is the chip number for Honda Accord:
Tap “Instrument”>>Asian car>>Honda>>ACCORD>>S6J3001(read-write)
This is the Honda Accord Wiring Diagram Board, follow it strictly to connect all the wires needed.
Mileage shown on BDM+4ExtBoard now(Not repaired):
Tap “Start”, it will connect the BDM board>>initializing the device>>reading EEPROM of chip
When reading completed, save the data file of S6J3001(read-write). You must save it, otherwise, you can’t do the next step.
Tap “Open”>>555.bin file (as an example)>>Write
Wait 1 or 2 minutes, writing succeeded!
Check the repaired mileage here in the board. It shows “555 km”.
It means operation for Honda Accord Mileage Repair is a big success!
This is how we can use CG100 PROG III auto computer programmer to help us adjust car mileage.
That’s all. Thank you for sharing your time with us!
Don’t forget to contact us at:
Email: sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698
Or leave a message at https://www.cardiagtool.co.uk/