Update Date: August 19, 2026
Version: V1.1.9.0 → V1.2.0.0
FormulaFlash has released the major V1.2.0.0 software update, introducing new BMW ECU unlock capabilities and expanding Bench Mode support.
The latest release focuses on Bosch MD1/MG1 ECUs and adds support for Bosch DDE8/DME8 ECUs in Bench Mode.
BMW MD1/MG1 Bench Unlock
The new update brings a more convenient solution for supported BMW Bosch MD1 and MG1 ECUs.
The new Bench Mode function provides
- No ECU cover opening required
- No mail-in unlock required
- Direct Bench Mode access
- ECU Read / Write / Unlock
- Checksum verification
This allows technicians to work with supported ECUs directly on the bench without opening the ECU casing.
Supported Bosch ECU Models
FormulaFlash V1.2.0.0 currently supports the following BMW Bosch ECU models shown in the update:
| ECU | MCU |
|---|---|
| Bosch MD1CP032 | TC299 |
| Bosch MD1CS001 | TC298 |
| Bosch MG1CS024 | TC298 |
| Bosch MG1CS049 | TC298 |
| Bosch MG1CS201 | TC298 |
Representative BMW Models
The update covers representative BMW applications
- BMW 3 Series
- BMW 5 Series
- BMW X3
- BMW X5
The exact vehicle and ECU coverage depends on the specific ECU configuration.
Bosch DDE8 / DME8 Bench Mode Support
Another important addition in V1.2.0.0 is Bench Mode support for Bosch DDE8 / DME8 ECUs.
This further expands Formula Flash’s bench programming capabilities and provides technicians with additional options for ECU read/write operations.
What’s New in V1.2.0.0?
- The major update can be summarized as
- BMW MD1/MG1 → Bench Unlock + Read/Write
Bosch DDE8/DME8 → Bench Mode Support
With these additions, FormulaFlash V1.2.0.0 provides a more streamlined workflow for supported BMW ECU programming tasks.
Important Note
The information above is based on the official update details shown in the supplied FormulaFlash V1.2.0.0 announcement. Specific vehicle coverage should be checked in the Formula Flash software before performing an operation, as compatibility may vary by ECU model and configuration.