I want help to configure eCOM to work with Xentry 7/18 enabling DOIP
Code:
C:\Program Files (x86)\Mercedes-Benz\Xentry\bin\PDU\SDConnect\PDUAPI_I+ME_ACTIA_XS.ini
then Go to section [eCOM PFW]
Edit value of key “Firmware” to “eCOM_SDconnect_24_Fw.zip”:
Firmware=eCOM_SDconnect_24_Fw.zip
Here is configuration Protocol
Control Panel ? Network and Internet ? Network Connections ? Local Area Connection ? Properties ? Internet Protocol Version 4 (TCP / IPv4) ? Properties ? Use the following IP address (check)
Ip For eCom
IP address 169.254.255.42
Subnet mask 255.255.0.0
Use the address of the next DNS server (check)
Preferred DNS server blank
Alternate DNS server blank
Advanced setting ? Add
Ip For SDconnect to make Toolkit alive with eCOM
172.29.127.100
result
169.254.255.42 255.255.0.0
172.29.127.100 255.255.0.0
OK ? OK ? Close
With this, “eCom & SDconnect” works within Xentry.
Note : This config working 100%
Here is eCOM with Xentry with test on DoIP!
