OBDSTAR P003 Adapter Bench/Boot Modes Connecting Guide

OBDSTAR P003 Adapter is designed for reading BOSCH ECU data, CS, Pincode etc., including Audi, Citroen, DS, Mahindra, Peugeot, Skoda, SEAT, Volkswagen etc.

Here we’ll show you how to use OBDSTAR P003 Adapter on Bench/Boot modes.

Equipment Overview:

obdstar-p003-adapter-bench-boot-modes-connecting-methods-1

Diag cable OBD connector(male)
Connect P003 connector(female)
P003 adapter
Boot jumper(spring needle)
Boot jumper(welding)
ECU pin connector
ECU boot connector
12V power

Support List

BOSCH EDC17U01(TC1766), MED17.5(TC1766), MED17.5.1(TC1766), MED17.5.20(TC1766), MED17.5.5(TC1766), MED17.5.5 HW2(TC1766), EDC17C46(TC1767), ME17.5.6(TC1767), ME17.5.20(TC1767), MED17.5.2(TC1767), MED17.5.5(TC1767), MED17.5.5, HW2(TC1767), MED17.5.21(TC1782), MED17.5.25(TC1782), EDC17C54(TC1797), EDC17C64(TC1797), EDC17CP44(TC1797), EDC17CP44 MS(TC1797), ME17.1.1(TC1797), ME17.1.6(TC1797), MED17.1.1(TC1797), MED17.1.1 MS(TC1797), MED17.1.6(TC1797), MED17.4.4(TC1793), MD1CS018(Euro 6/TC298TP), MG1CS042(Euro 6/TC298TP), MG1CS003(Euro

6/TC298TP) etc.

How to Connect P003 ECU Adapter?

1)Bench Mode

Step 1: Connect 1, 2, 3 together as pic below

obdstar-p003-adapter-bench-boot-modes-connecting-methods-2

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram

Step 3: connect 12V power with diagnostic device

Step 4: read data on diagnostic device

2)Boot Mode

Step 1: Connect 1, 2, 3 together as pic below;

obdstar-p003-adapter-bench-boot-modes-connecting-methods-3

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram;

Step 3: connect 7 with 4 or 5 and connect it to ECU;

Step 4: connect 12V power with diagnostic device;

Step 5: read data on diagnostic device.

Any questions, contact us.

https://www.cardiagtool.co.uk/

Email:sales@cardiagtool.co.uk

Whatsapp: +86 15002705698