It has been tested and verified by cardiagtool.co.uk engineer that GODIAG GT100 ECU connector can work well with Launch X431 V to read data stream on 2015 Nissan Teana No issues.
Maybe some customers will ask “X431 V has the function to read data stream, why does it also need to work with Godiag GT100?”
The reason is that GT100 can prevent X431 V scan tool being burnt out. Because the circuit in the diagnostic socket of some cars may have been modified, and another situation is that for old cars, the on-board circuit is aging (broken wire and short circuit), which may also short- circuit and burn the equipment. GT100 can play a good role in protecting the equipment.
Launch X31 Pro+ Godiag GT100 Test Report:
All tools need:
2015 Nissan Teana
Launch X431 V 8inch Tablet Wifi/Bluetooth Full System Diagnostic Tool
GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector
Note: Both Launch X431 Pro and GODIAG GT100 are cheaper in 11.11 sale at cardiagtool.co.uk (valid from Nov 9th to Nov 18th).
Connection:
1.Plug the convertor into GODIAG GT100
Note: Sometimes it’s difficult to connect X431 Pro into the car. The reason is that the OBD2 diagnostic port of some car is relatively narrow, and the port of Bluetooth connector is relatively larger and shorter.
Using the GT100 convertor to connect the car will perfectly solve the problem.
2.Turn on the ignition
3.Plug the OBD extension cable into the car
Note: In general, the OBD diagnostic port is under the drivers’ seat
4.Connect the end of the OBD convertor to the Bluetooth adapter of X431 V
5.Turn on GT100 power switch, 12V (30) and 12V (15) switch
Then the X431 V scan tool Bluetooth indicator will be on
The car to connect is a 2015 Nissan Teana with CAN protocol, so the CAN-H and CAN-L indicators are on, that means X431 Pro is communicating with the car successfully.
Operation:
Turn on X431 V tablet-> Enter Launch X431 V main menu-> Select “Local Diagnose”
Select “Asia”-> “Nissan”-> Click “OK”
Select “Manual Select”- > “JPN”-> “TEANA”-> “L33”-> “01/2015”-> “System Selection”-> “Engine”
The CAN-H and CAN-L blue lights are always on, so the communication with the car is OK
Start the engine before reading the data of modules, and its voltage is 14.7V
Start to read data stream
Choose “Main signals”-> “Select All”-> Click “OK”
Tap “Combine” to view the data stream of multiple groups
At the same time, the Pin 6 and Pin 14 are flashing blue lights, and Pin 4 and Pin 5 indicates the condition of GND. 16 Pin indicates the condition of power supply.
Result: Launch X431 Pro perfectly works with GODIAG GT100 to read data stream.
Related posts:
Cardiagtool.co.uk 11.11 Big Sale 2020 : Up to 40% Off
GODIAG GT100 OBDII BREAK OUT BOX ECU CONNECTOR TEST REPORT
GODIAG GT100 AUTO TOOLS OBDII BREAK OUT BOX ECU CONNECTOR USING TIPS