By combining the most advanced key programming and immobilizer capabilities that is OE-level diagnostics and service functions, Autel MaxiIM IM608 scanner is a comprehensive immobilizer and key programming tool and ideal for auto technicians and locksmiths.
Check to see IM608 scanner’s Main Features:
1.Extraordinarily powerful Cortex A7+A15 six-core processor
2.10.1-inch LED capacitive touch screen with 1920×1200 resolution
3.Internal reliable 64GB On-board Memory for better performance
4.Built-in 8-megapixel rear camera with autofocus and flashlight
5. 802.11 a/b/g/n/ac Wi-Fi to access your favorite web resources
6.Open source Android Operating System for fast boot-up and multitasking
7.Powerful combination of advanced key programming/all systems diagnostics/advanced maintenance services
8.Professional key programming equipped with XP400 key programmer and MaxiFlash ECU programmer for complete Immo coverage
9.Smart mode for guided and automated key learning
10.Expert mode for advanced key learning
11.Read PIN/CS (all key lost), generate key, key learning, remote learning
12.IMMO ECU reset/adaptation, refresh/coding
13.Read/write transponder data, ECU/MCU/EEPROM data (eg. 9S12 encryption chip), IC card, detect remote frequency
14.Powerful OE level diagnostics for more than 80 US, Asian and European makes and models
15.Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, coding etc.
16.All special functions, EPB, DPF, SAS, Oil reset, BMS, TPMS sensor ID relearn, etc.
The following part is gonna be the step-by-step operation guide of IM608 scanner’s all keys lost programming.
Main Operation Procedures:
Come to the Home screen and tap “IMMO”>> “Accept the Disclaimer”>> Choose the vehicle type of “Volkswagen” here.
The IM608 unit will start the process of “Diagnostic program loading”.
In the appearing interface, click on “Advanced Mode”>> “IMMO 4 + MQB Key”>> “All keys lost”, the unit screen will show the users all the three functions that are gonna performed under the process of “All keys lost” programming.
<1>Read IMMO data
<2>Make dealer key
<3>Key adaption to vehicle
After a few seconds, the unit will begin reading IMMO data itself, the screen will pop up a message, click “Yes” to confirm the pay-per-use of this function.
Checking authorization…, the “Communication status” shows like this:
All you have to do is follow the instruction and be careful about doing every step.
Then, tap “OK” to push forward the “Read IMMO data” process.
“Calculation is completed! Tap “OK” to move on to the “Make dealer key” process.
Tap “Yes” to confirm that you want to make a dealer key.
The unit will start connecting programmer. When seeing the message of “please put a Blank Key in the programmer keyhole and then press [OK], do it as required.
Establishing communication with the key right now.
When this information appears, think carefully! Here, tap “Yes” to continue.
Establishing communication with the key…
Make dealer key successfully! If you want to generate the next key, tap “Yes”, otherwise, tap “No” to make it stop.
Very well! The IM608 scanner will come to the process of “Key adaption vehicle”, tap “Yes” to confirm you vehicle has Kessy.
The step of Key learning will ask you to confirm the number of keys that need to be learned from vehicle.
Here, type “1” in the box and click on “OK”.
Key learning completed! Congratulations!
Autel IM608 Volkswagen Jetta 2017 All Keys Lost Via OBD Programming is a big success!
That’s all. Thank you for sharing your time with us!
Don’t forget to contact us at:
Whatsapp: +86 15002705698
Or leave a message at https://www.cardiagtool.co.uk/
to tell us what suggestions or questions you have about our products.