• LAUNCH & AUTEL FACTORY SALE

Ktag

How to Reset Tokens for KTAG V6.070 Ksuite V2.13?

Did you have the problem when you used KTAG firmware V6.070 (Now  is update to Ktag V7.0.2) that the software prompted “mandatory update within the next 5 [...]

(Solved) Ktag Ksuite 2.xx Error: The tool is not powered correctly

My Ksuite 2.23 and 2.25 on Ktag clone showing me following error. "The tool is not powered correctly : Control power supply" I tried stock 12v 1A power [...]

How to solve Ktag 7.020/Kess V2 5.017 “Protocol not found”

Here are possible solutions shared by Ktag 7.020 or Kess V2 5.017 users for the problem “Protocol not found” on their ECU [...]

Ktag Ford Transit SID20: How-to’s with Reviews

Here, I’ll guide you to step by step read 2013 Ford Transit ECU SID208, using Cloned Ktag firmware 6.070 software 2.08 ECU: SID208 from 2013 Ford [...]

How to solve clone Ktag checksum error

Hello bros. I’ll chime in with my experience of ktag clone checksum error: in Ktag slave (full backup) ver - read and write ok in Ktag master - [...]

How to use Ktag 7.020 for Read/Write/Backup/Restore

Ktag 7.020 Red PCB Backup, Restore, Read and Write: Select the proper Family, then: Click on Help for the see the connection instructions. Connect to [...]

KTag Tricore BOOT Simos PCR2.1

PCR2.1 Read/Write with Ktag: Tricore BOOT Simos PCR2.1 adapter Move the retainer carefully, towards the ECU and ensure that all pins are in their [...]

How to OBD read Mk6 PCR 2.1 with Kess V2

Confirmed: Mk6 PCR 2.1 can be read using kess V2 Tip from others. help me a lot You can use chinese clone not reworked unit : fgtech v54 , ktag 6.070 , [...]

Ktag read/write BMW EDC17CP02 in Tricore Boot mode

Ktag ecu programming manual: how to backup, read, write a BMW EDC17CP02 ECU in  tricore boot mode. BMW EDC17CP02: ktag k-tag ecu programming [...]

Chip Tuning vs ECU Remapping: Kess, Ktag, Mpps

What is the difference between Chip Tuning and ECU Remapping? The difference is basically the age of the techniques used to obtain the cars “map file”. [...]

Ktag fw v7.020 sw v2.23 China clone free download and Installation guide

Here provide Ktag fw v7.020 sw v2.23 free download link and installation guide. Ktag fw v7.020 sw v2.23 download: Free: Not sure which day I am [...]

New Ktag fw 7.020 China Clone Vs Ktag fw 7.020 Eu clone

Before choosing Ktag fw 7.020 China Clone or Ktag fw 7.020 Eu clone, you must read this post on their differences. Price Ktag fw 7.020 China Clone, [...]

2017 Ktag KTM100 firmware 7.020 User Manual

KTAG fw 7.020 updated!! So, anything new and better in the new v2.23 Ktag KTM100 fw 7.020? Here you go. Ktag ktm100 fw 7.020 highlights Toyota 76FXXX, PSA [...]

Multi-language Ktag v7.020 China Clone 100+ ECU Types list (Lots pictures)

Here attach the newest Ktag sw v7.020 sw v2.23 100+ ECU types list (Lots [...]

Ktag master: Immo off to me17.5.6 All ok

Ktag master Immo off to me17.5.6!!!! All ok!!! So here is the same with 2.0 [...]

Ksuite 2.08 download: fix Ktag sw 2.13 fw 6.070 internet connection

  Here is a customer solution (@ecuconnet ) of ktag sw: v2.13 hw: v6.070 internet connection. The solution here is aimed to solve all grey [...]

What Best ECU Programmer Tool can read EDC17?

What best ECU Programmer Tool can read EDC17 at a good price? Here some options: BDM100, FGTECH 54, MPPS v16, kess v2.06 etc. Experienced ECU tunners [...]

Ksuite Installation Tips for Kess V2 V2.15 Ktag V6.070

Kess V2 V2.15 and Ktag V2.13 V6.070 are both popular ECU tools. Here is a guide article to solve some errors on installation. Question from Customer [...]

KTAG master 14P600KT06 cable Pin Out, tested it works

Correct KTAG master 14P600KT06 cable pin out: Yellow pin3- yellow. orange pin 4-organge. yellow pin 13-green orange pin 14-white. Use the wires as [...]

Ktag master ECU programming tool use tips

Ktag master ECU programming tool : Item NO. SE80: FW V5.001, €89 free shipping Item NO. SE80-B: FW V6.007, €165+ shipping Item No. SE80-C: FW [...]
error: Content is protected !!