Comments Off on How to use KTMflash to read/write ECUs (Infineon, gearbox, etc)
How to use KTMflash to read/write ECUs? Here is the details steps:
1You have to use software from cardiagtool.co.uk
2 ECU flash and the like cannot be [...]
Comments Off on Read dump Corsa D 1.0 with UPA? Xprog? Opcom?
This is for an opel/vauxhall corsa D 1.0 with a damaged body controller, and tips here may help you how to read the dump and put it to a new body [...]
Comments Off on Ktag Ford Transit SID20: How-to’s with Reviews
Here, I’ll guide you to step by step read 2013 Ford Transit ECU SID208, using Cloned Ktag firmware 6.070 software 2.08
ECU: SID208 from 2013 Ford [...]
Comments Off on How to use EWS4 adapter with Xprog-M/R270
It’s aimed to help you all to connect to an EWS4 adapter, read and write BMW EWS4 using a Xprog or R270 programmer.
Applicable to:
All models fitted [...]
Comments Off on How to use Ktag 7.020 for Read/Write/Backup/Restore
Ktag 7.020 Red PCB Backup, Restore, Read and Write:
Select the proper Family, then:
Click on Help for the see the connection instructions.
Connect to [...]
Comments Off on Is your CarProg useful for Hyundai Kia 2015+?
Question: Is this tool useful for Hyundai Kia 2015+? Need airbag crash module to clear.
Answer: Yes. Carprog programmers from me can work good for Hyundai [...]
Comments Off on BMW X3 2004 EWS4 key making with Xhorse Tool
Here is the post about how to program a new BMW X3 2004 key and do eeprom job with Xhorse vvdi (VVDI2 and VVDI-Prog)
Q: Can i make a x series key with the [...]
PCR2.1 Read/Write with Ktag:
Tricore BOOT Simos PCR2.1 adapter
Move the retainer carefully, towards the ECU and ensure that all pins are in their [...]
Comments Off on Kess V2 5.017 SD Card Image Download Free
I rebuilt and generated a SD card image for the RED Kess V2 5.017.
This image can fit in small SD cards.
This image is generated specially for the RED Kess [...]
Comments Off on CN MPPS V18 Reviews (Updated in Dec. 2017)
CN MPPS V18 reviews are updated.
Credits to Laura collected reviews here
Source: http://mhhauto.com/
12-18-2017, 02:35 PM
i tested mpps v18 on sid [...]
Comments Off on How to OBD read Mk6 PCR 2.1 with Kess V2
Confirmed: Mk6 PCR 2.1 can be read using kess V2
Tip from others. help me a lot
You can use chinese clone not reworked unit : fgtech v54 , ktag 6.070 , [...]
Comments Off on Xprog & W203 Key v57: read, upload dump, get password
Topic: Mercedes W203 how to get key password
I borrowed this picture from somewhere else, but this is how my EIS looks like. key is v57
on rosfar [...]