New 2019.05 Scania supports multi-language, works with Scania VCI3 scanner to individually tailor all the information needed to carry out servicing, fault-tracing and repairs on each individual vehicle, thus enhancing the quality and precision of the workshop's operations. Besides that, it can save much time for customers as well.
Scania Multi 2019/05 [...]
When I used the JLR mangoose SDD pro V142, it reminded me that the software has been expired. So I write this blog to share with you the problem and its solution in
This blog lists the specific vehilcle models supported by OBDSTAR X100 Pro on the function of odometer correction and key programming. All these neww added models has been
Autel MaxiDAS DS708 vs. Foxwell GT80 Scanner
This blog shows us the comparison between Autel MaxiDAS DS708 and Foxwell GT80 diagnostic tool.
This blog records the compatibility problem and its solution about Wow and Dephi V2014.3 software when I use the tcscdp diagnostic tool.
I have a
I will describe my experience with the programming device OEM Orange 5 in this blog. Sincerely hope to help people who have intention to purchase it.
I was trying
Recently, I purchased a Kess V2 V2.22 ECU Chip Tuning. I will share my experience with you in this blog.
I was confused about finding an auto ECU programmer for pulling and
It is said the new released Vbox Volvo XC90 diagnostic tool can replace the traditional Volvo Vida Dice. This blog aims to compare these two diagnostic tools to get the
Since new Carprog V8.21 firmware version has released at cardiagtool.co.uk, it obtained lots of favorable comments from customers. Here is the software installation guide for
One of my customers asked me a question about how to choose car key programmer to make keys. Here is the specific information.
Several days ago, I purchased a V2.24 Scania VCI3. I will share my problem during installation with you in this blog.
It cost me €199 with 3 days delivery. The product
Full carprog software version has updated to V9.31. It can be free download here:
Have you remember the MasterKey 3 key programmer which definitely is the only tool to renew used keys. Now MK 3 has added new joints for Toyota and Lexus.
Basic info and
This blog aims to help freshmen to use V157 Can Clip for Renault and give some available suggestions on frequently questions
If you purchase a V157 Renault Can Clip. You
OEM orange 5 with full set of adapters is popular among the public. Our engineer has already tested the software installation successfully. This is the procedure step by
Digimaster 3 Digimaster III is one of the most famous odometer corrections produced by Yanhua Company. Here is the new updated version of digimaster 3 information, especially
Here is how to add keys manually for old ford expedition 2001 when using the key pro M8 auto key programmer.
Car model and year:
Ford expedition 2001
Kess V2 V2.15 and Ktag V2.13 V6.070 are both popular ECU tools. Here is a guide article to solve some errors on installation.
Question from Customer A:
When I installed
Last week, I bought an obdstar X100 pro auto key programmer online to get the function of eeprom.
I got my obdstar X100 after 3 days delivery. The package was well
error: Content is protected !!