Got feedback from customers worldwide, especially European areas, they are looking for a tool that can do basic diagnosis and special functions for car model, 2.0 TDI Passat 2007 (KN57TYS) b6 3c5.
Here, Vident iAuto 702 pro scanner is highly recommended in low-medium and cost-efficient product series. Many would ask, “WHY?” Check below.
Vident iauto702 pro is multi-application service tool that not only supports ABS/SRS full scan for most of the car brand in the market but also supports 31 Special functions.
VIDENT iAuto 702Pro Product Function:
View freeze frame data
O2 monitor test
On-board monitor test
2.ABS,SRS diagnosis functions
View freeze frame data
Component test/active test
For car model, VW Passat, it is able to do special function incl. Oil light service/ reset, BRAKE PAD REPLACEMENT, STEERING ANGLE SENSOR RESET, BRT (BATTERY RESET), ELECTRONIC THROTTLE SENSOR RESET, TPMS (TIRE PRESSURE SENSOR RESET), DPF (REGENERATION OF DIESEL PARTICULATE FILTER ) and Injector coding.
Chart below to show the details:
|Oil service light reset||VW||PASST|
|BRAKE PAD REPLACEMENT||VW||Passat||1996-2017|
|BRAKE PAD REPLACEMENT||VW||Passat B8||2014-2017|
|BRAKE PAD REPLACEMENT||VW||Passat CC||2009-2017|
|BRAKE PAD REPLACEMENT||VW||Passat CC B8||2014-2017|
|BRAKE PAD REPLACEMENT||VW||Passat USA/CDN||2005-2006|
|STEERING ANGLE SENSOR RESET||VW||PASSAT||1996-2017|
|ELECTRONIC THROTTLE SENSOR RESET||VW||PASSAT||1989-2014|
|TIRE PRESSURE SENSOR RESET||VW||PASSAT|
|REGENERATION OF DIESEL PARTICULATE FILTER||VW||PASSAT|
Please have your attention: Where the year is blank in the chart is that this functionality does not differentiate by year, and the corresponding functionalities are supported by iauto702 pro.
Using Vident iauto 702 pro to perform special functions is quite easy and convenient for customers. Here in this article will take oil service light reset and battery reset as examples.
Oil service light reset main procedures:
1. Connect iAuto 702 pro to the vehicle
2. Enter Application main menu -> Select OilResetxxx option
- Read the Oil service light reset prompt
- Select the corresponding car make-> Software Reset-> Automatic Scan
- Switch on the ignition, and read out the current vehicle info
- Then follow the operator messages on the screen to operate
- Set ignition switch to off/on
- Read and clear fault codes
Battery reset main procedures:
- Connect iAuto 702 pro to the vehicle
- Enter Application main menu -> Select BRTxxx option
- Pay attention to the Battery reset instruction:
- Then choose the corresponding car brand -> Automatic Scan
- Switch on ignition to read the current vehicle info
- Then follow the instruction on the screen to operate
Good item, don’t miss it!
That’s all. Thank you for sharing your time with us!
Don’t forget to contact us at:
Whatsapp: +86 15002705698
Or leave a message at https://www.cardiagtool.co.uk/
to tell us what suggestions or questions you have about our products.