Comments Off on MQB dashboard odometer correction tool choose
There are two options of MQB dashboard odometer correction: Xhorse VVDI2 and Obdstar tools (Obdstar X300M, H110 or x300 pro key master, etc.)
So, how to [...]
Comments Off on Xhorse Iscancar VAG MM-007 update to V2.2.3
Xhorse Iscancar VAG MM-007 Support controller diagnostic, such as basic setting, channel adaption, read DTC, clear DTC, system login etc. And Now with new [...]
Comments Off on How to read EEPROM data using Digiprog 3
Confirmed! Digiprog 3 odometer correction tool for EEPROM data reading
You have to know:
On some vehicles, you may see an eight-pin EEPROM chip that is [...]
Comments Off on Odometer correction: Digiprog 3 4.94 or Obdstar X300M?
Odometer correction tool: Digiprog 3 4.94 vs OBDSTAR X300M, which of these two tools is better, in principle fundamentally for the modification of [...]
Here are good and bad results of working with R270 programmer.
Good results:
eeproms from bmw and opel ok
CAS4 wih 1L15Y from new bmw works ok
All [...]
Comments Off on R270 Programmer Reviews: EZS CAS M5080
Here are reviews/opinions of R270 BDM programmers tested on Mercedes EZS, BMW CAS, M5080 and so on.
All works in circuit, no adapters with it
For me Not [...]
Comments Off on BMW CAS 2000-2014 mileage correction by Digimaster 3 III (with CAS modules pictures)
To correct mileage on BMW CAS 2000-2014 year, Yanhua Digimaster 3 III is the best choice.
Attach a detailed table including CAS1 912DG128(3K91D), CAS2 [...]
Comments Off on Digiprog3 DP3 V4.94 Mileage Correction Test Report OK and Fail List
Here a full Digiprog 3 V4.94 mileage correction Test Report collected from real users’ test results.
Digiprog 3 V4.94 mileage correction tested OK [...]
Comments Off on Touareg r5 2.5 year 2004 mileage correction with digiprog 3 v4.94 question and answer
I know it is ok that Touareg r5 2.5 year 2004 mileage correction with digiprog 3 v4.94. While I failed to do it at beginning but finally sorted it out, so I [...]
Comments Off on Peugeot 2005 807 2.0L doing BSi mileage with Digiprog3 clone V4.94
This post starts with the question about Peugeot 2005 807 2.0L doing BSi mileage with Digiprog3 clone V4.94.
BSi SAGEM 21654442.
I need help doing mileage [...]
Comments Off on How to use Digimaster 3 to change VW Audi mileage?
Digimaster 3 is the BEST odometer tool for universal cars including Ford, BMW, Toyota, Benz, VW, Audi, Volvo, Renault… from 1996-2015. Following guide is for [...]
Comments Off on OBDSTAR X300M odometer adjustment feedback on works and fail
OBDSTAR X300M odometer adjustment tool is newly released and already receive many users feedback on what it works and fails, details as follows, hope it helps. [...]
Comments Off on V1.8.1604.20 Digimaster 3 III Software Update News
Digimaster 3 Digimaster III is one of the most famous odometer corrections produced by Yanhua Company. Here is the new updated version of digimaster 3 [...]
Comments Off on Tacho Pro U2008 Adjust Mileage for Toyota Corolla C46
This blog is described around the issue that how to read eeprom when adjust mileage with Tacho Pro U2008. Sincerely hope this will help friends with the same [...]
Comments Off on Review on 2016 Original Digimaster 3 Odometer Correction
Recently, I purchased a 2016 original Digimaster 3 odometer correction master, which gave me great help.
This is my story. In fact, several days ago, I have [...]