How Renault Can Clip reprogram a fuel injection ECU?

Renault can clip is not only a scanner and diagnostic tool, but it also has some special functions like reprogram Renault ECU. This blog will show you how Renault Can Clip reprograms a fuel injection ECU step by step.

How Renault CAN Clip diagnostic interface re-flash/code Renault injector ECU?

Step1. Install Renault CAN Clip diagnostic software. CAN Clip V160 is the newest version now. This blog is a detailed how-to guide:

Renault Can Clip V160 Free Download and Installation Steps

http://blog.cardiagtool.co.uk/renault-can-clip-v160-free-download-and-installation-steps/

Step2. Connect CAN CLIP interface with vehicle via OBD socket. Select the reprogramming page. Obtain the VIN of the vehicle automatically. Select the reprogramming button.

renault-can-clip-reprogram-ecu-1

Step2. Click “SELECT THE COMPUTER TO BE PROGRAMMED” then “SELECTION” then click validate.

renault-can-clip-reprogram-ecu-2

Step3. Input the Repair Order and the vehicle Technical Specification code then click validate. After that make sure two things done: 1. Connect battery charger to the car. 2. Plug Can Clip Renault into the mains.

renault-can-clip-reprogram-ecu-3

Step4. There will be a tip “Select programming mode”, choose “CD-ROM”.

renault-can-clip-reprogram-ecu-4

Step5. Select the number for the software to download depending on the recorded operation commons, then confirm, then click “Software reference” and press Validate

renault-can-clip-reprogram-ecu-5

Step6. Input vehicle AFTER SALES REPROGRAMMING CODE then press Validate.

renault-can-clip-reprogram-ecu-6

Here you need use Renault Pin Extractor to calculate AFTER SALES REPROGRAMMING CODE by request code. Here is the Renault Pin Extractor Zip file for you:

http://cartechnology.co.uk/attachment.php?aid=3557

renault-can-clip-reprogram-ecu-7

Now it is programming. Please remember no operation on the vehicle or on the tool. This procedure will last for 5 minutes. Wait until the procedure is complete

renault-can-clip-reprogram-ecu-8

Then reprogramming is done! Return to the home page and save result. Next exit the CAN Clip software.