How to install cutter and probe/ clamp on Xhorse Dolphin XP-005

Dolphin XP-005 is a portable machine, with a small volume and lightweight, is particularly and carefully designed for locksmiths worldwide. This article will highlight the method to install cutter, probe and clamp on this Xhorse auto key cutting machine.


Here we go one by one.

How to install/ uninstall cutter and probe

1.Installation steps:

Step 1: Put the cutter into the cutter mounting hole and push the cutter to the limit

Drop the cutter 2-5 mm down

When the screw is perpendicular to the notched part of the side of the milling cutter, the locking screw and the fixed milling cutter

Step 2: Push the probe into the probe mounting hole and the tip of probe need to be higher than the tip of cutter

Turn the ‘probe locking screw’ clockwise until the probe is locked.


2.Uninstallation steps:

Step 1: Unscrew the locks for cutter and probe counter-clockwise until they are loosened off

Step 2: Take the cutter or probe off when it is loose


How to install clamp:

Step 1: Unscrew the clamp locking screw

Step 2: Choose the proper clamp for your keys

Slide it into the clamp holder

Push it to the limit from right side

Step 3: Fix the clamp locking screw until the clamp is locked


Clamp display:

Clamp M1


Clamp M2


Clamp M3


Clamp M4



Clamp M2 sides selection


Clamp M4 instruction

Clamp M4 for household keys, mainly support standard single and double keys, also for crucifix keys, example as follows:


Sided keys


Crucifix keys


Xhorse Dolphin XP-005 source: