OBDSTAR F-100 is most powerful key programmer for Ford, Mazda, Jaguar and Landrover. Support latest models of Mazda vehicles and no need pin code. This blog will show you how to program Ford Ranger Chip 6E via F100. Good luck!
Equipment: OBDSTAR F100 Ford/Mazda Auto key programmer
Vehicle:FORD RANGER 2013 (CHIPTP336E)
Two keys
Connect F100 key programmer with var via obd2 port, Power up F100, choose “IMMOBILISER”
Choose vehicle brand “FORD/LINCLON V31.07”
It is loading…
Initializing…
Authorizing…
Choose “Ford”
“USA Ford”
“Immobiliser”
Then choose vehicle model “Ranger”
Select “Program Keys”
It will show the message: if all key lost, need at least 2 keys to complete key programming, press ENT to continue
Then insert the new key (to be programmed) and turn ignition on, press ENT to continue
The security light blink means that this key is not programmed
Now OBDSTAR F100 read that there have 3 keys in the car, press ENT to continue
F100 is communicating to car…
You will find the security light go off and OBDSTAR F100 show you the current keys number is 4, press ENT
Done! OBDSTAR F100 Ford/Mazda program CHIP 6E FORD RANGER 2013 success!