Comments Off on VNCI JLR DOIP for SDD Pathfinder and Topix Cloud
VNCI JLR DOIP is compatible with JLR SDD, Pathfinder, and Topix Cloud.
To use Topix Cloud, users need to update VNCI JLR DOIP firmware to V1.0.07 or [...]
Comments Off on What is Autel MOTOR TruSpeed Repair Function?
Autel released a new online database "MOTOR TruSpeed Repair". In Autel Diagnostic Tablets, it displays as "Vehicle Data".
Motor TruSpeed Repair is aimed at [...]
Comments Off on Launch X431 Tesla Function Compatibility, Activation and Support List
One customer asked if his PAD VII Elite with Tesla License activated would support model S 2021 and up.
So, here we will share Launch X431 Tesla Function [...]
Comments Off on FoxFlash Read DCM3.3+ Renesas SH72544 OBD or Boot Mode?
One customer wonders if FoxFlash Tool would full backup DCM3.3+ Renesas SH72544. And if the module would be bricked over OBD mode or have to be done via Boot [...]
Comments Off on How to Connect Launch X431 Tablet to Tesla by Service Mode
To diagnose Tesla by service/ maintenance mode, we need to connect Launch X431 Tablet to car using X431 LAN Cable via LAN port.
In this article, we will [...]
Comments Off on Xhorse Multi Prog EDC16U34 IMMO Off Script Test OK
Xhorse Multi Prog would work with scripts written by users for KM repair, ECU tuning...
Here is a review of Multi Prog with IMMO OFF Script:
MULTI-PROG [...]
Comments Off on Solved! Autel IM608 II Set Password Network Error
Quick Question:
Autel IM608 II Tablet, when setting a password for a device, it always prompts a network error, but other devices would be connected to [...]
Comments Off on Fixed! Launch X431 PRO5 BMW Headlamp Coding System Error
One customer gave feedback that his Launch X431 PRO5 Tablet showed this error. He replaced headlamp module in BMW f10 2016 STML& STMR but cannot find the [...]
Comments Off on How to Solve Autel Ultra Lite “ECU Drive Authorization Failed”?
One customer gave feedback about his Autel Ultra Lite:
Mercedes C63 2008 (w204)
I tried to program new ECU (MED9.7) and during the flash I got write [...]
Comments Off on Everything You Need to Know about Launch X431 ADAS License
One customer asked where is the ADAS menu in his Launch X431 VII Elite. Have activated ADAS software from backstage but the tablet still asks for [...]
Comments Off on Launch X431 PAD V Elite vs. X431 PAD VII Elite
One customers asked about the difference between Launch X431 PAD V Elite and Launch X431 PAD VII Elite.
Generally, PAD VII Elite has better firmware than [...]
Comments Off on Alientech KESS3 V1.87 Add DCU15C167 SID605 MD1CC898
Alitentech KESS3 V1.87 upgrade is now available!
DCU15C167 SID605 EDC16C8 MD1CC898 for Heavy-duty Vehicles are added.
Check out update info, all KESS3 [...]
Comments Off on How to Install Alientech KESS3 Software?
In this article, we are going to show you how to install Alientech Kess3 software.
How to Install KESS V3 Software?
Go to Alientech official website: [...]
Comments Off on How to Solve Autel ADAS Calibration “Pre-scan Report status”?
Quick Question:
I have an Autel MS909 Tablet with Autel ADAS License, and I keep getting vehicle's with pre-scan report. How do I get past this screen with [...]
Comments Off on Alientech Kess3 V1.86 Add Marelli MM10JA and IAW 11GF
Alitentech KESS3 V1.86 upgrade is now available!
Reprogram on bench the Magneti Marelli MM10JA and IAW 11GF are added.
Check out update info, all KESS3 [...]
Comments Off on Launch X431 PAD Series Online Programming Vehicle List
Quick Question:
Does X431 PAD VII Elite supports online programming? What vehicles it supports, and if there is IP restriction on online programming [...]