CGDI CG100X V1.9.7.0 Update: Add Volkswagen 2QD 1K0 Airbag Models
The CGDI CG100 Programmer released new software version 1.9.7.0 on November 6th, 2025.
What is new in CG100X V1.9.7.0:
Added 6 chips to Programmer.
Added 24 models to airbag.
Added 9 models to read-write.
The following models are added for airbag.
CY15B102Q
CY15E064J
CY15E004Q
NUC029SEE
NUC131LD2AE
NUC131SD2AE
The [...]
OBDSTAR DC706 Read GPEC2A PCM on Bench/ Boot Tips
One customer gave feedback about OBDSTAR DC706 working on GPEC2A:
Having some issues reading flash on GPEC2A PCM... I have made all connections as instructions say to do [...]
Alientech KESS3 V1.97 Add Isuzu N-Series Truck Denso 276700-2051
Alitentech KESS3 V1.97 upgrade is now available!
Isuzu N-Series Truck Denso 276700-2051 on Bench Mode are added.
Check out update info, KESS3 with an active subscription [...]
OBDSTAR DC706 April 2024 Update Add MEG17.9.8 MEDG17.9.8
OBDSTAR DC706 ECU Tool April 2024 Update is available!
New version adds Hyundai/ KIA KEFICO MEG17.9.8 TCM(R5F72549R), Hyundai/ KIA KEFICO MEDG17.9.8 [...]
Best Key Programmer for EWS4: Autel, VVDI, or AK90?
One customer wondered if there is any adapter good for making EWS4 system easier with Autel 608 II? He has done the job with an ews4 adapter with Autel, but those chips are so [...]
How to Solve Alientech KESS3 Error 007C-0005-8000?
Quick Question:
When I connect Alientech Kess3 and it is sychronizing, it always gives error 007C-0005-8000 and cannot launch software app.
Here is the [...]
What is New for Launch X431 PRO5 SmartLink?
Launch X431 PRO5 SmartLink is released as the upgraded version of X431 PRO5.
Let's check out what is new for this new Launch X431 PRO5.
1.Smartbox 3.0 vs. SmartLink [...]
How to Use Launch X431 SmartLink 2.0 Remote Diagnosis?
In this article, we are going to show you the new feature of Launch X431 SmartLink 2.0 -- Launch Super Remote Diagnosis.
This function allows users to diagnose vehicles [...]
How to Unlock Europe Software Package (SGW/ TSB) on X431 Tablet?
Launch X431 Tablet Users:
X431 Europe Professional Software License Package is now available on Mall.
Supported Tablets:
Launch X431 PAD VII Elite
Launch X431 [...]
Alientech Kess3 V1.96 Add JCB Delphi DCM7.24 BOOT Mode
Alitentech KESS3 V1.96 upgrade is now available!
Tuning and Cloning Delphi DCM7.24 for JCB on BOOT Mode are added.
Check out update info, all KESS3 with an active [...]
How to Register and Update OBDSTAR X300 Classic G3?
New OBDSTAR X300 Classic G3 comes as an Immobilizer tool with various licenses to activate.
Here we will show you how to register and update it.
1.How to [...]
Launch X431 PRO Elite Reset Injector Code for Volvo 2012 Tips
Purpose:
2012 Volvo v50 1.6 d2 diesel (D162T ) engine,
Vin No (YV1MW84E1C26...)
Tools:
X431 PRO Elite (All X431 Tablets could do this job)
After [...]
Solved! Autel MK908 PRO II Can’t Connect to VCI
One customer gave feedback that his Autel MK908 PRO II Diagnostic Tablet can't connect to its VCI.
Here is how to troubleshoot it:
1.Check if phone [...]
Is POWERGATE The Phone Version of KESS3?
Alientech released a new ECU and TCU programmer for cars and motorcycles -- POWERGATE.
One customer asked if POWERGATE Tuning Tool is the phone version of KESS [...]
2023-2025 GR86 Toyota Subaru BRZ AKL Programming Tips
Here is a case of 2023-2025 GR86 Toyota Subaru BRZ all key lost from Qussi Marji.
Vehicle:
No bypass cable for smartbox
There is no eeprom in it
No Smart box [...]
Alientech Kess3 V1.95 Add Denso 112731-5040 and 33910-79JX/57KX
Alitentech KESS3 V1.95 upgrade is now available!
Remap and clone on bench the ECU Denso 112731-5040 and Denso 33910-79JX/57KX for Subaru and Suzuki are added.
Check out [...]
How to Activate Full ECU/ Odometer/ Airbag Function on OBDSTAR G3?
One customer asked why there is big difference between OBDSTAR DC706 and OBDSTAR X300 Classic G3. The BODY module document shows that, the same with ECU. DC706 has plenty more [...]
How to Use Launch X431 SmartLink C as J2534 VCI?
One customer gave feedback that he cannot use Launch X431 PAD VII Tablet on AC Delco TDI. He just updates SmartLink C, but the VCI won't work, how to fix it?
Here we [...]
Autel Ultra Add Live Data Fusion and VIN/ Odometer Check
Autel adds Live Data Fusion into diagnostic function and VIN/ Odometer into service function.
Let's check out update info.
1.Live Data Fusion
Enable the [...]
Alientech KESS3 Slave Read Denso RHF4 4N15 Tips
One customer asked is there a protocol for this Denso 4N15 MA275700-9692 on KESS3. He can't even get an ID reading the file is just mumbojumbo almost encryption looking. It is [...]
How to Solve Autel AP200 “VCI not connected” Error?
Quick Question:
Autel AP200 Scanner, it pairs with the phone but does not connect to vci. My iphone works well but android 14 fails. AP200 app just got stuck on that [...]