How to Unlock FCA/ Renault/ Mercedes SGW on X431 Tablet?
Launch X431 Tablet Users: X431 Europe Professional Software License Package is now available on Mall. Supported Tablets: Launch X431 PAD VII Elite Launch X431 PRO5 SmartLink Package includes: 1)X431 Passenger Car Software 1 Year 2)CarSET PRO 1 Year (TSB) 3)SGW Pack (Mercedes 1 Year, Renault& Dacia 20 Connections, FCA& [...]
Obdstar Tool Latest Update in February 2019
Obdstar Tool Latest Update in February 2019:
IMMO
Zotye
Optimized Damy X5 remote control system
Great Wall
1. Increased Great Wall Kulla smart key [...]
Autel MS906 review
This review is for the Autel MS906:
I wanted to write this review to hopefully help some others out there. One thing that I really wanted the ability to do is program keys. [...]
CGDI Programmer Software Latest Update
CGDI Programmer Latest Update including CGDI BMW,CG-Pro,CG-100. Detail Update information as the following：
CG-DI BMW Update to V2.6.0 :
(2019.03.05)
1. [...]
Boot mode read EDC15: Galletto software vs. MPPS cable
This is: How to read ecu edc15 on the bench in boot mode? can be done with Galletto software or a MPPS cable?
About Boot mode:
Bootmode is a design feature of the [...]
Carprog 11.35 Download: FREE, NO Password
Free download Carprog 11.35 software:https://mega.nz/#!xQJg3Awa!cbg7vEgiVySaNr23aUJP51barV1YuZW48LRh4nwF5nY
Version: 11.35
Security: Unknown! it's your own [...]
How to solve: Autel J-2534 No Communication
There are many factors may cause loss of communication when doing Autel J2534 programming.
Here are some pointers specific to Autel and Java:
Connections:
Connect [...]
How to install Autel J2534 driver for ECU programming
Autel J2534 driver installation instruction:
- used for Autel ms908p, maxisys Elite, J2534 box
- download and install Maxisys j2534 Drivers and Printing [...]
Possible to use Ktag or Kess V2 with 2014 Volvo truck TRW 2.3?
Is it possible to use ktag with 2014 volvo truck ecm. trying to get dpf delete on that truck?
Question from users who tested on this ecu:
kess v2: can
If I am not [...]
Kess V2 virtual read files: download + how to install
Kess V2 virtual read files:
https://mega.nz/#!MoInHJYQ!-IzbqxvMPcOGBKaojAK4P2xV020qZM9eXAv6IPB1grQ
ori psw was decrypted by kess when you take id on car
How to [...]
Ford IDS special functions: Enabled! (attached how-to’s)
Ok, just had a play and i managed to get to enter the code (here: 60274) to enable and activate Ford IDS special functions
I found where IDS stores these [...]
ECU Remapping – What You Have to Know
Here are things you should have before mapping/remapping a car.
Math
you need to have a reasonable understanding of maths, and how to use a scientific [...]
Peugeot 407 2007 remote program: Done with Lonsdor K518ise!
Possible to program remotes (Peugeot 407 2007) using Lonsdor?
Yep! it's tested. Lonsdor K518ise is able to read pin codes and program new keys and remotes to 407.
The [...]
VVDI2 can read ISN for DME MSV90 on 2011 BMW 528i?
Car: 2011 BMW 528i, DME MSV90, CAS4
Purpose: read the ISN - possible?
Good tips and guides:
Depending on the tool u using.
There's tool on the market [...]
VVDI Prog V4.7.9 Review
VVDI Prog Newest Version V4.7.9 Update details:
Download:
https://mega.nz/#!q4RygayJ!Pn-iZDsSQIvzvAIR3D-JXxjk2_c1p_fvF3qj4ndYCXU
VVDI Prog v4.7.9 (2018-1-27)
* [...]
VVDI MB TOOL Newest Update V4.8.0
VVDI MB TOOL latest software version V4.8.0 update:
*** 2019-01-27
*** Require firmware V4.5.0
===== BENZ V4.8.0 =====
1. This update doesn't need to update the [...]
Should I buy GM MDI if I have Tech 2 already?
I have a Tech 2 scanner in hand, so is it necessary to buy a new GM MDI interface?
I am using Tech 2 off [...]
Obdstar New Update in January 2019
Obdstar tool latest update on Jan.22 , 2019:
IMMO
BMW
1. Increased the security mechanisms
2. Increased the SWFL version with key programming
3. Solved the [...]
How to erase 35080vp with R270 programmer?
Here 're the solution helps you erase 35080vp with a R270 programmer reworked. The risk is yours. Good luck!
1- Change the power supply to good quality: 12V 1.5A !
2- [...]
VVDI MB Tool Update to V4.7.0
VVDI MB TOOL latest software version V4.7.0 update(2019-01-18)
Require firmware V4.5.0
===== BENZ V4.7.0 =====
1. This update no need update the firmware
2. Password [...]
CGDI BMW Update To V2.5.0
CGDI BMW V2.5.0 Update Review:
1. Added BMW E series programming, support single module programming of E60, E65, E70, E89, R56 and other chassis models [...]