New Genius ECU programmer tool (some users call it K-touch) was released at cardiagtool.co.uk from Dec. 29, 2015, so far more than 10 pieces of K-touch reach to customers’ hand. At the first beginning, some users have problem with software installation, later our engineer help them solved out therefore an increasing number of users are happy with K-touch.
Then what K-touch can do more than Kess? Please read following parts:
1.k-Touch V05 PC required: K-touch is the world-first touch map ECU programmer tool designed with touch screen and no need PC to run, users can read and write ECU data by touch the screen. It is very easy to use, watch video to see how easy it operate:
2.K-touch V05 Vehicle coverage: K-touch covers more than 100 vehicle models than KESS and KTAG. Please refer to K-touch supported car list.
3.K-touch V5.05 is real or fake:
To judge whether Genius V5.05 is real or fake, please confirm if it works with Gearbox vag DQ500, Genius hwV5.05 at www.cardiagtool.co.uk site works with Gearbox vag DQ500 while other old version does not support.
4.Tokens: K-touch is designed with 2 buttons, one is to reset power, and another is to reset tokens. After the tokens is used up, just press the button to reset tokens.
5.Newly add new language Hungarian compared with KESS fw v4.36 sw V2.15.
k-Touch V5.05 shares the same features as kess V2 V4.036 at following aspects:
- Maker: k-Touch V5.05, ktag V4.036 and kess V4.036 are made by the same Company
- Update method: update hardware to add more vehicle models and function.
- Read and write ECU method: via OBD2 directly, no need to take apart the ECU and open it.
Customer feedback on all available the low price ECU programmers: KESS, KTAG, FGTECH and MPPS:
- The First customer feedback:
KESS (even china good clone)…more stable than MPPS on can-line and good job on recovery…mpps good job on k-line (sometimes and can-line)…fgtech (i hate this tool)-but sometimes save your as…and best ktag-trasdata-no obd but safe boot mode,pinout direct conection and bdm…
- The second customer feedback:
KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).
With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and open it, after you can make the read/write operation.
Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.
Fgtech Galletto ECU programming tool is perfect for both OBD use and BDM use.