Author: sales
Autel MS908P or Auro OtoSys IM600?
Is it good to buy Auro OtoSys IM600 or Autel MS908P? That is a question. IM600 does have very powerful function esp. auto diagnostic and key programming. Note [...]
Auro OtoSys IM600 changes VIN for 2018 Jeep Wrangler
Test report: 2018 Jeep PCM VIN change with Auro IM600
Date: 17-04-2018
Car: 2018 Jeep Wrangler
Owner: Kevin Suttorp (BIG THANKS!!)
Address: [...]
How to Solve VCM II cannot connect to PCM
Here are solutions and suggestion of VCM II and PCM connection failure.
Solution:
I reinstalled the firmware in recovery mode using [...]
VVDI MB adds a key (EIS) to 2003 S class: Success
This is a discussion from a Facebook group - Xhorse the best.
Purpose: Trying to add a key to a 2003 s class
Tool: VVDI MB Tool
Problem: Everything [...]
How to update Lonsdor K518ISE Hibernation Function?
Why do you need update Lonsdor K518ISE for the hibernation function?
Save power to prolong stand-by time. Auto standby function can prevent the device from [...]
How to use EWS4 adapter with Xprog-M/R270
It’s aimed to help you all to connect to an EWS4 adapter, read and write BMW EWS4 using a Xprog or R270 programmer.
Applicable to:
All models fitted [...]
How to solve clone Ktag checksum error
Hello bros. I’ll chime in with my experience of ktag clone checksum error:
in Ktag slave (full backup) ver - read and write ok
in Ktag master - [...]
SEC-E9 key cutting machine cuts VW HU162T: Success!
SEC-E9 key cutting machine is updated! Now, new data of VW HU162T is added. You can cut VW HU162T using SEC-E9 cutter.
Upload images...
Attach a [...]
How to program 2013 Passat slot key AKL with Xhorse VVDI2
Confirmed! Xhorse vvdi2 can work for 2013 Passat slot key AKL.
By dump! Not through the obd!
Do you need a special cable for the dump?
Vvdi prog or [...]
Xhorse Condor XC-Mini update to 4.0.4
Xhorse Condor XC-Mini update to [...]
How to use Launch X431 Diagun IV
Here, I’m gonna to show you how to use a Launch X431 Diagun IV to test a car.
(sorry for the bad resolution of my photos; but the Launch has a good [...]
Which Launch x431 scan tool for trucks?
Looking for a Launch scan tool for truck diagnostic & programming... and here is what i found on the web. Hope it’s helpful to you [...]
How to use Ktag 7.020 for Read/Write/Backup/Restore
Ktag 7.020 Red PCB Backup, Restore, Read and Write:
Select the proper Family, then:
Click on Help for the see the connection instructions.
Connect to [...]
CGDI MB 2.5.0.0 Update Details
CGDI Prog MB has updated to 2.5.0.0 on March. 13, 2018. Add more function and support more car models.
CGDI Pog MB 2.5.0.0 details:
1. Add ELV repair [...]
Auro OtoSys IM600 Renew BMW FEM/BDC
There are two options are available on Auro OtoSys IM600 when accessing FEM/BDC Renew:
l Copy Data Update: When the immobilizer information of the vehicle [...]
Auro OtoSys IM600 Compare with IM100
Auro OtoSys IM600 Review:
Auro OtoSys IM600 key programmer combines the most powerful IMMO and programming functions with OE-level diagnostics and [...]
How to use GM MDI interface for programming
GM has had its newest programming/J2534 Pass Thru device on the market for some years now. A lot has been said about it and I am here to tell you that I have [...]
Golf 7 & Amarok 2014 MQB Mileage Correction: Obdstar H110 Done!
Which tool can do mileage for Golf 7 and Amarok 2014 jonson control dash
I have smok uhds but seems not support that kind of dashboard
I think support only [...]
Xhorse VVDI MB Tool update to V4.0.0
Xhorse Company Update VVDI MB Bga Tool to newest version V4.0.0 on Mar.14,2018. Require V4.0.0 firemare. VVDI MB Tool V4.0.0 Update including bugfix [...]
Should I buy GM MDI instead of Tech 2 clone?
The Tech2 clone is definitely fine, but I think people looking for a good tool now should really look at an MDI clone instead.
The Future of the Tech [...]